Skip to main content
  • NZ$29.90
  • GST-Inclusive Price
  • NZ$391.07 Shipping
Ships from United States.
Most customers receive within 9-17 days.
Shop it at NeweggBusiness.

Meet Your Seller

Arctic ACTPD00023A Thermal Pad Basic (120x20mm /t:0.5mm) Pack of 4

  • EFFICIENT THERMAL CONDUCTIVITY: The Thermal Pad based on silicone and a special filler outperforms generic and performance pads by far
  • FILLING THE GAPS: Due to its low hardness and great compressibility, the thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems
  • EASY TO APPLY: Installing the ARCTIC Thermal Pad is child's play; perfect for beginners
  • SAFE HANDLING: The Pad doesn´t contain any metallic particles, is electrically isolating and not capacitive. Is safe as contact with any electrical traces would not result in damage of any sort
+
+
Overview
Specs
Reviews
Arctic ACTPD00023A Thermal Pad Basic (120x20mm /t:0.5mm) Pack of 4


Efficient Thermal Conductivity

The Thermal Pad based on silicone and a special filler outperforms generic and performance pads by far.


Filling the Gaps

Due to its low hardness and great compressibility, the thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
.


Easy to Apply

ARCTIC's Thermal Pads are non-stick and can be easily removed and repositioned. Installation is child's play, making them perfect for beginners.
.


Safe Handling

The Pad does not contain any metallic particles, is electrically isolating and not capacitive. The handling is safe as contact with any electrical traces would not result in damage of any sort.

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies*

  • Return for refund within: 30 days
  • Return for replacement within: non-replaceable
  • This item is covered by PlatinumMicro Return Policy
  • *Subject to applicable law
  • Warranty Notice:

    This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.

Manufacturer Contact Info

LOADING...

The ARCTIC ACTPD00023A is a pack of four 120 × 20 mm silicone thermal pads, each 0.5 mm thick, for users who need a compressible thermal interface to fill gaps between uneven surfaces.

Recommended For

  • PC builders replacing a thermal pad on a motherboard chipset or other small component where the required gap is about 0.5 mm; ARCTIC identifies chipset heatsinks and IC chips as thermal-pad uses.
  • M.2 SSD or small-device owners adding a thermal interface between a chip and its heatsink, when the measured gap calls for a thin 0.5 mm pad.
  • DIY repairers who need to cut narrow strips to size for small electronic components; ARCTIC says its pads can be cut and are non-adhesive for positioning.
  • Users insulating electronics near electrical traces who want a non-conductive, non-capacitive pad for a correctly sized component-to-heatsink gap.

Real-World Use Scenarios

  • When an M.2 SSD’s heatsink pad is missing or no longer makes contact, a builder can cut this pad to cover the drive’s components; if 0.5 mm matches the gap, it can restore a thermal path to the heatsink and may help limit heat-related slowdowns during long transfers.
  • During GPU maintenance, a user can replace a worn pad over VRAM or a voltage-regulation component when the card’s service information specifies a 0.5 mm pad; correct contact helps transfer heat to the cooler, while the wrong thickness can affect cooler pressure and temperatures.
  • When servicing a motherboard or compact electronics board, a user can cut the pad to fit a chipset or power component beneath its heatsink; its compressible material can fill a small, uneven gap when 0.5 mm is the specified thickness.
  • For a small electronics repair or heatsink retrofit, a hobbyist can trim the pad to bridge a measured gap between a warm component and a heat spreader; it offers a pre-formed, electrically insulating interface, but it is not a substitute for thermal paste on a closely fitted CPU or GPU die.

Spec Summary

AttributeValue
Best ForFilling gaps in universal cooler applications where a 120 × 20 × 0.5 mm thermal pad is suitable
MaterialSilicone
Dimensions120 × 20 × 0.5 mm
Compatibility And MountingUniversal cooler heatsink compatibility; PCB mount
Pack Quantity4 thermal pads
Model And BrandARCTIC ACTPD00023A Thermal Pad Basic

Reference Q&A

Q: ARCTIC TP-1 Basic vs. TP-3 at 0.5 mm: which should I choose?

A: Choose the TP-1 Basic when you want a 120 × 20 mm, 0.5 mm strip in a four-pack. Choose the TP-3 when you want ARCTIC’s premium-positioned pad, which is offered in more sizes and pack configurations and is described for applications with differing chip heights.

Q: Should I get this 0.5 mm ARCTIC TP-1 pad or a 1 mm TP-1 pad?

A: Choose based on the gap you need to fill or the thickness of the pad being replaced. ARCTIC advises selecting a pad thickness just above the measured gap; the 0.5 mm TP-1 is the listed 120 × 20 mm four-pack, while the 1 mm TP-1 variant is listed as a 100 × 100 mm four-pack.

Q: For a wider area, should I use the ARCTIC TP-1 Basic strip or an ARCTIC TP-3 sheet?

A: Choose the TP-1 Basic when the 120 × 20 mm strip format suits the area being covered. Choose a TP-3 sheet when you want a larger sheet that can be cut to the required shape; ARCTIC lists TP-3 in 100 × 100 mm and 200 × 100 mm sizes, depending on variant.

Q: How do I know if this 0.5 mm thermal pad will fit my device?

A: Use it only where the device specifies a 0.5 mm thermal pad. Check the device’s service documentation or the original pad thickness: a pad that is too thin may not make contact, while one that is too thick may interfere with assembly.

Q: Can I cut this thermal pad to fit a smaller component?

A: Thermal pads can be cut to fit. This product comes as four 120 × 20 mm strips, so measure the contact area and trim a strip to the required shape and size.

Q: What is this thermal pad best used for?

A: It is intended to transfer heat across small gaps between a component and a heatsink, including where the surfaces are uneven. Its 0.5 mm thickness makes it suitable only for applications that call for that thickness.

Q: Is this thermal pad electrically safe around circuit components?

A: The product listing describes the pad as electrically insulating and non-capacitive, and says it contains no metallic particles. Still, install it as a thermal interface and follow the device’s service instructions.

Q: Will this 0.5 mm pad fit my GPU or laptop?

A: Only if the component’s required pad thickness is 0.5 mm and the 120 × 20 mm strips can cover the needed areas. Reddit discussions about Arctic pads stress that the correct thickness depends on the specific device and cooler; check its service information or original pads before replacing them. Those discussions mention Arctic TP-3, not this exact Basic SKU, so they are fit guidance rather than a product-specific test.

Q: Can I stack these 0.5 mm pads if the gap is thicker?

A: The 0.5 mm thickness alone does not establish that stacking is suitable for a particular device. Reddit discussions show that pad thickness and compression affect cooler contact, and users report mixed outcomes. Check the device’s required thickness and confirm the cooler makes proper contact rather than assuming stacked pads will work.

Q: Is this a reasonable option for replacing GPU thermal pads?

A: It may suit a GPU repad where 0.5 mm thickness is confirmed and the strips cover the required areas. Reddit users report using Arctic 0.5 mm pads in GPU repairs, but results depend on the card and correct fit; those reports do not establish performance for this exact Basic SKU. Replacing pads also requires careful disassembly and thickness checks.