Transition Networks SI-IES-1200-LRT Unmanaged Hardened Poe+ Injector - Poe Injector ( Din Rail Mountable ) - 24 / 48 V - 30 Watt - Output Connectors: 1

The Transition Networks SI-IES-1200-LRT is an unmanaged, DIN-rail-mountable industrial PoE+ injector with one Gigabit Ethernet port and up to 30 W of power, suited to network installers adding PoE+ to compatible devices in factory floors, outdoor enclosures, or other demanding environments.

Recommended For

• Industrial network installers powering one IEEE 802.3af/at camera, access point, or other PoE device from a nearby 24–48 VDC supply, especially where an Ethernet run reaches the device but PoE is not available at the switch.
• Factory-floor and industrial-control installers who need a compact, unmanaged PoE+ injector mounted on a DIN rail and rated for operating temperatures from -40°C to 75°C.
• Technicians adding a single PoE+ endpoint inside an outdoor cabinet or other protected enclosure, where the installation benefits from a hardened unit and a wide operating-temperature range.
• Installers who need a simple point-to-point PoE addition rather than a managed switch, and can use the unit’s link pass-through and redundant DC input connections.

Real-World Use Scenarios

• In a factory or other harsh indoor setting, an installer mounts the injector near the Ethernet switch and uses it to power a compatible PoE camera or access point; the endpoint receives data and power over one Ethernet cable.
• When a network switch has no PoE port available for one more device, the installer places the injector between the switch and a compatible endpoint; the injector adds PoE power without replacing the switch.
• For a camera or access point in a location without a convenient local power outlet, a technician can provide DC power to the injector near the network switch and run Ethernet to the endpoint; this avoids needing a separate powered connection at the device.
• In an outdoor network deployment, an installer can place the injector in a suitable protected enclosure and use it to power a compatible Ethernet device; the injector is designed for harsh environments, but its IP30 housing is not a substitute for outdoor weather protection.
• On an industrial control-panel DIN rail, a technician can install the injector to supply a compatible PoE splitter or other powered Ethernet equipment; the single-port design suits one endpoint rather than a group of devices.

Spec Summary