The Nippon Labs 60HDMI-FFC is a female-to-female HDMI coupler for joining two HDMI cables, suited to users who need a simple connection extension in a setup supporting up to 8K at 60Hz (7680 × 4320), with a listed maximum distance of 5 meters.
Recommended For
- People whose existing HDMI cable is just short of reaching a TV or receiver can use this female-to-female coupler with a second male-to-male cable to bridge the small gap, rather than rerouting the original cable.
- TV owners with a wall-mounted or hard-to-access display may find it useful when joining an existing in-wall HDMI cable to a short, flexible cable near the TV, so the connection can move with the display mount.
- Home-theater users reusing existing HDMI cables may prefer a compact joiner for a short, fixed connection, provided the combined cable run works reliably with their source and display.
Real-World Use Scenarios
- A wall-mounted TV’s existing HDMI cable falls just short of the connection point. Join it to a short HDMI cable with the coupler to reuse the installed cable instead of replacing the whole run; check that the combined connection stays stable at your intended picture and refresh-rate settings.
- A TV or monitor has been moved, leaving the HDMI cable from a console, receiver, or computer too short. Connect that cable to a second one to bridge the new gap while keeping the existing cable; if the display flickers or loses signal, try a shorter or single replacement cable.
- A home-theater setup needs to connect equipment across a room, such as a receiver and projector, and two available HDMI cables can reach when joined. The coupler provides a simple connection point, but it does not boost the signal, so test the full cable run with the video and audio settings you plan to use.
- An installed HDMI cable is difficult to remove or reroute, but a short patch cable can reach the nearby TV or display. Join the patch cable to the installed lead to avoid replacing the entire cable; keep the connection accessible and avoid putting strain on the coupler.
Spec Summary
| Attribute | Value |
|---|
| Best For | Joining two HDMI cables with a female-to-female coupler for an extended HDMI connection |
|---|
| Video Compatibility | Supports resolutions up to 7680 × 4320 at 60 Hz and is compatible with previous HDMI versions |
|---|
| Connectors | Two HDMI connectors, female to female |
|---|
| Connection Distance | Maximum distance of 16.4 ft (5 m) |
|---|
| Construction And Finish | Aluminum alloy housing designed to resist EMI and RFI interference, with gold-plated connectors |
|---|
| Dimensions | 28.8 × 20.6 × 10 mm |
|---|
| Model Identifiers | Nippon Labs 60HDMI-FFC |
|---|
All Categories
