Your Browsing History
- In Stock
Quick View
Graphics Card GPU Holder, Anti Sag Stand Bracket Video Card Anti-Bending Magnetic Mount Brace for ATX/M-ATX/Mini-ATX Iron Case ,1"-1.97" Height Adjustable, Black
- Color: Black
- Changer Type: Other
- Model #: 11-001-057x2
Quick View
EnLabs U2CR35MA Metal Case 3.5" Floppy Bay Front Panel SDHC Micro SD MMC CF XD TF Flash Memory Internal All In 1 USB 2.0 Card Reader w/ USB Port Hub
- Installation Type: Internal
- Support - Compact Flash: Yes
- Support - Memory Stick: Yes
- Support - MMC: Yes
- Model #: U2CR35MA
Quick View
10pcs/lot 15x15x0.4mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.4mm
- Dimensions: 15mm x 15mm x 0.4mm
- Model #: 11-001-267
Quick View
EnLabs M.2 NGFF (SATA) SSD to 2.5inch SATA Adapter Converter w/ 7mm Case Enclosure for Socket 2 B/B+M Key NGFF, 2.5" SATA III to SATA-bus 2280 2260 2242 2230 M.2 (NGFF)
- Material: Aluminum
- Specifications: Interfation:M.2 NGFF(SATA-Bus) to 2.5" SATA. Enclosure case thickness: 7mm. Support: 2.5in HDD Hard Drive Bay.
- Number of Bay: 1
- Package Contents: 1 x M.2 NGFF(Socket 2 SATA Channel)SSD to 2.5inch SATA Converter Adapter Card with Enclosure. 1x Screw Driver. Screws.
- Model #: ENNGFF2SATA
- NZ$23.00 –
- More options from NZ$23.00 - NZ$27.60
- Free Shipping
Quick View
5 Sets/10pcs Raspberry Pi B+ Pi 2 Pi 3 Anodized Black Aluminum Heat Sink Radiator CPU RAM cooler,LAN cooling (2 Heatsinks/Kit)
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
- Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
- Model #: 11-001-200
Quick View
5pcs/lot Black Aluminum Fin Heatsink 25x25x10mm Electronic Cooling Radiator Heat sink for CPU,GPU Graphics Video Card dissipator
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
- Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
- Model #: 11-001-328
Quick View
10pcs/lot Aluminum Heatsink 20x20x6mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR Heat Sink Extrusion Fins
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
- Dimensions: 20mm x 20mm x 6mm
- Model #: 11-001-258
Quick View
20pcs/lot Aluminum Heatsink 14x14x10mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR,Router Heat Sink Extrusion Fins
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 14mm x 14mm x 10mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14 x 14 x 10mm/ 0.55" x 0.55" x 0.4" (L*W*H) Weight: 55g Package Content: 20pcs x Heatsink
- Dimensions: 14 x 14 x 10mm
- Model #: 11-001-322
Quick View
10 Sets/30pcs CPU RAM LAN Aluminum Heatsink Cooler,Mini PC Raspberry Pi 2, Raspberry Pi A A+, Raspberry Pi B B+ Radiator Cooling
- Color: silver
- Compatibility: CPU
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
- Model #: 11-001-255(10)
Quick View
2pcs/lot Anodized Black Aluminum Heatsink 35x35x10mm Chipset Radiator Cooler for Southbridge Northbridge IC,3W LED Cooling
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 25g Package Content: 2pcs x Heatsink
- Dimensions: 35mm x 35mm x 10mm
- Model #: 11-001-261
Quick View
10pcs/lot Aluminum Heatsink 8.8x8.8x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
- Model #: 11-001-393
Quick View
PCIe to USB 3.0 Card w/ 3.5" Front Panel 2 Ports USB 3.0, PCI-E Express to 4 USB3 (2 USB-A+20Pin to 2 Port Floppy Bay Hub) Expansion-Molex 4Pin
- External Ports: 4 port USB 3.0
- Standard: USB 3.0
- Data Transfer Rate: Up to 5.0 Gbps
- Specifications: Bus Type: PCI Express Mounting Type: Full Profile PCI slot cover Chipset: VIA VL805 Interface: 2x USB 3.0 Port Type-A & Internal USB 20pin header to 2x USB 3.0 floppy 3.5-inch front panel Data Transfer Rate: USB 3.0 - 5 Gbit/s Connector Type (s) 1 - PCI Express x1 Male Rear Ports: 2x USB 3.0 Port Type-A Female Front Ports: 2x USB 3.0 Port Type-A Female
- Model #: PCIEU32D20KIT
Quick View
1Set/33pcs Aluminum Heat Sink Radiator Heatsink Cooler Kit for GPU Graphics Card ,VGA Video Card Heat Dissipation
- Color: Silver
- Compatibility: VGA Chipsets
- Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
- Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
- Model #: 11-001-128
Quick View
PC computer 3.5 inch Floppy Bay Front Panel 4 Ports USB Hub Splitter,2 Ports USB 3.0 & 2 Ports USB 2.0
- Type: USB
- Standards: USB 3.0/2.0
- Ports: 2 x USB 3.0, 2 x USB 2.0
- Transfer Rate: Up to 5 Gbps
- Model #: 35FPU32PU22P
Quick View
4 Ports USB 3.0+ 2 Ports USB 3.0 5.25" Internal CD-ROM Bay Front Panel 6 Ports USB Hub,Motherboard USB 20 pin to 4 x USB 3.0 & 2 x USB 2.0 Spliter Adapter Cable w/ 5.25 inch Metal Bracket
- Type: USB
- Standards: USB 3.0/2.0
- Ports: 4 x USB 3.0, 2 x USB 2.0
- Transfer Rate: USB 3.0 5Gbps & USB 2.0 480Mbps
- Model #: 525FPU34U22
Quick View
10pcs/lot Aluminum Heatsink 20x14x6mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR,Router Heat Sink Extrusion Fins
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 14mm x 6mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
- Dimensions: 20 x 14x 6mm
- Model #: 11-001-321
Quick View
Premium 2Set(6pcs) CPU RAM LAN Heatsink Cooler Kit,Mini PC Raspberry Pi 2, Raspberry Pi A A+, Raspberry Pi B B+ Radiator Cooling
- Compatibility: Motherboard Chipsets
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
- Model #: 11-001-098
Quick View
2pcs/lot Anodized Black Aluminum Heatsink 35x35x10mm CPU Southbridge IC Transistor chip Cooling Radiator Cooler w/ Screws
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
- Dimensions: 35mm x 35mm x 10mm
- Model #: 11-001-262
Quick View
2pcs Anodized Black Aluminum FIn Heatsink 28x28x20mm Electronic Cooler Radiator Heat sink for Northbridge Southbridge IC Chip
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
- Dimensions: 28 x 28 x 20mm
- Model #: 11-001-327
Quick View
5pcs/lot Anodized Black Aluminum Heatsink 25x25x5mm Electronic Chip Cooling Radiator Cooler for power IC,Electric chipset etc.
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25mm x 25mm x 5mm Weight: 20g Package Content: 5pcs x Heatsink
- Dimensions: 25mm x 25mm x 5mm
- Model #: 11-001-260
Quick View
10pcs/lot 20x20x0.8mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
- Dimensions: 20mm x 20mm x 0.8mm
- Model #: 11-001-271
Quick View
10pcs/lot 20x20x1.2mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM IC Memory chips Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.2mm
- Dimensions: 20mm x 20mm x 1.2mm
- Model #: 11-001-273
