PLANET IFT-802TS15 Transceiver

Be the first to review this product...

Specs

Reviews

Learn more about the PLANET IFT-802TS15

Model
Brand	PLANET
Model	IFT-802TS15

Details
Device Type	Converter
Wavelength	1310nm
Fiber Cable	Single-mode Optical Fiber
Max Distance	15km
LEDs	System: Power 1 (Green) Power 2 (Green) Fault (Green) 1 x copper port: 10/100 (Green) LNK / ACT (Green) 1 x 100FX port: 100 (Green) LNK / ACT (Green)
Power Adapter	Power Input: 12 to 48V DC redundant power with polarity reverse protection function Power Consumption: 3 watts / 10 BTU (maximum)

Features
Feature	Interface: 1 x 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 Industrial Conformance: 12V to 48V DC, redundant power with polarity reverse protect function -40 to 75 degrees C operating temperature IP30 metal case Relay alarm for port breakdown Supports 6KV DC Ethernet ESD protection Supports 6KV DC EFT protection for power line Free Fall, Shock and Vibration Stability DIN-rail and wall-mountable hardware design Layer 2 Features: Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port Store-and-Forward Switching Architecture Features Store-and-Forward mode with wire-speed filtering and forwarding rates Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) Supports packet size of up to 1522 bytes CSMA / CD Protocol Automatic source address learning and aging

Dimensions & Weight
Dimensions	1.26" x 5.31" x 3.35"
Weight	0.95 lb.

Additional Information
First Listed on Newegg	December 28, 2018

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies*

Return for refund within: 30 days
Returns are subject to restocking fees and return shipping fees. Please click here to learn more about restocking fees and return shipping fees.
This item is covered by Newegg.com's International Order Return Policy.
Read full return policy for details.
*Subject to applicable law
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.

Manufacturer Contact Info

The PLANET IFT-802TS15 is an industrial 10/100Base-TX-to-100Base-FX fiber converter for network installers extending Fast Ethernet over single-mode fiber up to 15 km, with an SC interface and redundant 12–48V DC power support.

Recommended For

Industrial-network installers extending a 10/100 Ethernet connection over single-mode fiber for a point-to-point link up to 15 km, where the SC fiber interface matches the equipment at the other end.
Network technicians adding a fiber link in a plant, roadside cabinet, or other harsh-temperature location that benefits from DIN-rail mounting and a specified -40°C to 75°C operating range.
Installers connecting equipment over fiber in sites that use 12–48V DC redundant power and need the converter’s relay alarm for a port breakdown.
Teams replacing or matching an existing 100Base-FX single-mode SC link that needs a fixed 15 km reach, rather than a configurable SFP-based fiber interface.

Real-World Use Scenarios

On a factory floor, connect a 10/100 Ethernet device to a network over single-mode fiber; the fiber link can reach up to 15 km and is suited to electrically noisy environments. A compatible fiber endpoint is needed at the other end.
In a roadside traffic-control cabinet, use the converter to carry a local 10/100 Ethernet connection over fiber toward a remote network. Its industrial positioning and wide operating-temperature range suit exposed, electrically harsh installations.
For a long link between buildings or network cabinets, convert copper Ethernet to single-mode fiber instead of relying on a long copper run; the IFT-802TS15 supports links up to 15 km at Fast Ethernet speeds, with a compatible fiber endpoint at the far end.
Inside a compact industrial cabinet, mount the converter on a DIN rail and connect its two DC power inputs to separate or backup supplies; this supports installations designed to retain network connectivity if one power feed is lost.
For an ISP or small-office building fiber setup, use the converter to bridge a 10/100 copper Ethernet device to a 100Base-FX fiber connection; it can help extend the link to a fiber-fed building or curbside point when the rest of the connection uses compatible equipment.

Spec Summary

Attribute	Value
Best For	Converting a 10/100 copper Ethernet connection to single-mode fiber for links up to 15 km, including industrial installations
Ports And Fiber Connectivity	One 10/100 copper port and one 100Base-FX SC fiber port; single-mode fiber operates at 1310 nm
Networking Features	IEEE 802.3 and 802.3u Fast Ethernet; auto-negotiation and Auto-MDI/MDI-X on the RJ-45 port; store-and-forward switching with wire-speed filtering and forwarding, back-pressure and IEEE 802.3x flow control, support for packets up to 1522 bytes, CSMA/CD, and automatic source-address learning and aging
Power And Consumption	12–48 V DC redundant power input with reverse-polarity protection; maximum consumption of 3 W (10 BTU)
Industrial Design And Protection	Operates from -40 to 75 °C; IP30 metal case; relay alarm for port breakdown; 6 kV DC Ethernet ESD and power-line EFT protection; free-fall, shock, and vibration stability; DIN-rail and wall-mountable
Status Indicators	Green indicators for Power 1, Power 2, fault, copper-port 10/100 and LNK/ACT, and fiber-port 100 and LNK/ACT
Physical Specifications	1.26 × 5.31 × 3.35 in; 0.95 lb
Model Identifiers	PLANET IFT-802TS15; device type: converter

Item#: N82E16833322132