₱12,003.63
VAT-Inclusive Price
Ships from Hong Kong.
Most customers receive within 7-9 days.
Sold by Zienroylein
Shipped by Zienroylein
Meet Your Seller
RP2350-PiZero Microcontroller Development Board Based on Raspberry Pi RP2350, Onboard DVI Interface, TF Card Slot and PIO-USB Port, Compatible with Raspberry Pi 40PIN GPIO Header, 16MB Flash
- RP2350-PiZero development board based on Raspberry Pi RP2350 dual-core & dual-architecture microcontroller: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz; 520KB of S-R-A-M, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion. Onboard TF card slot for reading and writing TF card. Type-C connector for easier use; Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard bat-tery recharge/discharge header, suitable for mobile scenarios; Adapting 5 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support; USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip
+
+
Overview
Specs
Reviews
RP2350-PiZero development board based on Raspberry Pi RP2350 dual-core
& dual-architecture microcontroller: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
520KB of S-R-A-M, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion. Onboard TF card slot for reading and writing TF card. Type-C connector for easier use
Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard bat-tery recharge/discharge header, suitable for mobile scenarios
Adapting 5 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support
USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip
& dual-architecture microcontroller: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
520KB of S-R-A-M, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion. Onboard TF card slot for reading and writing TF card. Type-C connector for easier use
Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or device via onboard PIO-USB port. Onboard bat-tery recharge/discharge header, suitable for mobile scenarios
Adapting 5 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels. 12 × Programmable I/O (PIO) state machines for custom peripheral support
USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies*
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by Zienroylein Return Policy
- *Subject to applicable law
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















