Your Browsing History
- In Stock
Quick View
5 Sets/10pcs Raspberry Pi B+ Pi 2 Pi 3 Anodized Black Aluminum Heat Sink Radiator CPU RAM cooler,LAN cooling (2 Heatsinks/Kit)
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
- Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
- Model #: 11-001-200
Quick View
En-Labs ENU325SSDHTS 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure Case Box Support UASP for 7 & 9.5mm SATA I/II/III SSD and HDD
- Type: Enclosure
- Maximum Capacity (per Bay): Up to 1TB
- Features: Slim aluminum 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure SATA III to USB 3.0 enclosure,Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 UASP enclosure, 20% faster than traditional USB 3.0, lower CPU utilization Compatible with 7mm~ 9.5mm slim 2.5 inch SATA I,SATA II
- Package Contents: 1 x 2.5 inch HDD Enclosure 1 x 1.64ft USB Data Cable 1 x Screwdrive 1 x Screws package
- Model #: ENU325SSDHTS
Quick View
10pcs/lot 20x20x1.0mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
- Dimensions: 20mm x 20mm x 1.0mm
- Model #: 11-001-272
Quick View
10pcs/lot 15x15x0.4mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.4mm
- Dimensions: 15mm x 15mm x 0.4mm
- Model #: 11-001-267
Quick View
2pcs Anodized Black Aluminum FIn Heatsink 28x28x20mm Electronic Cooler Radiator Heat sink for Northbridge Southbridge IC Chip
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
- Dimensions: 28 x 28 x 20mm
- Model #: 11-001-327
Quick View
10-Pack ITHOO Molex 4pin Powered PCI-E PCI Express Extender Riser Cable- VER 006S Raiser Card- 1X to 16X PCIE USB 3.0 Adapter Card w/ 2ft USB Extension Cable - GPU Graphic Card Crypto Currency Mining
- Type: internal power cable
- Type: Riser Cable
- Length: 2FT
- Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Molex 4 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 008S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign
- Model #: 3910002
Quick View
5pcs/lot Black Aluminum Fin Heatsink 25x25x10mm Electronic Cooling Radiator Heat sink for CPU,GPU Graphics Video Card dissipator
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
- Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
- Model #: 11-001-328
Quick View
EN-Labs GPU Power Splitter Cable, PCIe 6pin to 2 PCI Express 8 Pin Power Adapter Cable for Video Card, Gaming Graphics Card ,6 Pin to 6 2 Pin Internal Power Adapter - 6 Inches
- Type: Power Splitter
- Type: Cable Splitters
- Color: Multi-Color
- Length: 6" - 10"
- Model #: PCIE6SPL28PIN6
Quick View
EnLabs DP4KMM6FT Gold Plated DisplayPort to DisplayPort Male to Male Cable - DP 4K2K 60Hz Resolution Ready (DP to DP Cable) Black - 6 Feet
- Type: DisplayPort Male to Male Cable
- Cable Length: 6 ft.
- Connector Number: 2
- Model #: DP4KMM6FT
Quick View
2 Ports PCIE PCI-e to USB 3.0 Expansion Card - USB Hub Controller Express Card Adapter for Desktop PC w/ Molex 4 pin Power
- Type: PCI Express to USB Card
- External USB Ports: 2-port USB 3.0
- Specifications: Bus Type:PCI Express Type Standard:Profile (LP bracket incl.) Chipset:NEC uPD720202 Interface: USB 3.0 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s) 1 - PCI Express x1 Male External Ports 2 - USB Type-A (9 pin) USB 3.0 Female Internal Ports 1 - Molex 4 pin Plug
- Package Contents: 1 x PCI Express USB 3.0card 1 x Driver CD
- Model #: PCE2USB-RD1
Quick View
EnLabs FP525U27M PC Case 5.25 inch front panel 7 Ports USB 2.0 USB Hub w/ SATA 15pin Power Connecor(USB 2.0 9pin Connector & 2ft Adapter Cable)
- Type: USB
- Standards: USB 2.0
- Ports: 7 x USB 2.0
- Transfer Rate: 400/480Mbps
- Model #: FP525U27M
Quick View
PS2 USB Adpater,USB Male to PS/2 Female Splitter Mouse Keyboard PS2 Converter Extension Cable,KVM Barcode Scanner PS/2 to USB
- Part Number: 3
- Changer Type: USB to PS2
- Color: Black
- Specifications: Premium USB to Dual PS/2 Y Adapter for Windows/Mac/Linux Keyboard & Mouse,Bar Code Scanner Connects PS/2 mouse and keyboard through USB port on any computer Compliant with the Standard Specification of USB 1.0 and 1.1 Converts two PS/2 devices (Keyboard and Mouse) to the USB Interface Converts the PC PS/2 port of KVM switch to USB port (PC or SUN platforms)
- Model #: PRADUSB2PS2
Quick View
iPad Air Case,Flexible Soft Transparent TPU Rubber Back Cover for iPad Air 1 / iPad 5 Air (Not Compatible with iPad Air 2)
- Function: Made with Soft TPU cover to offer full protection all around the device,except for screen Ultra clear soft skin cover show off natural beauty of your Tablet Computer design. Precisely cut openings to allow full access to all the functions of your device Perfect fit /easy to install and remove compatible with iPad Air 1,NOT for iPad Air 2
- Compatibility: iPad Air
- Model #: 11-001-187BK
Quick View
EnLabs VGA250SPL1X2 VGA Splitter 1 In 2 Out,2 Ports 250MHz VGA Splitter HUB Support 1920x1440@60Hz Resolution
- Type: VGA Splitters
- Ports: 2
- Color: Black
- Specifications: Input : 1x VGA 15HDF interface input (Computer/TV Box/PS3 / PS4/DVD Player and other VGA devices) Output: 2-VGA 15HDF (Projectors/TV/Monitors etc) Video bandwidth: 250 MHz Transmission distance :100ft/30m High video resolution: 1920 x 1440 @ 60Hz Compatible with DDC, DDC2, DDC2B ( only Port 1) Support VGA, XGA, SVGA, UXGA, WUXGA and multisync monitors Important Notes: This VGA Splitters can only duplicate images from a computer to two monitors Need to set the same screen resolution,Can not support the different resolution on different screen Recommend use the monitor not more than 19'' Recommend use the vga cable which is 3+6
- Model #: VGA250SPL1X2
Quick View
10pcs/lot 15x15x0.3mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
- Dimensions: 15mm x 15mm x 0.3mm
- Model #: 11-001-266
Quick View
10pcs/lot Silver Aluminum 25x15x11mm TO-220 TO220 heatsink radiator for MOS,7805 Triode Transistors Cooler IC Chip dissipation
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC. Quantity: a lot of 10 Pieces. M3 Screw Hole. Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H) Color : Silver Tone Weight: 4g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
- Dimensions: 25 x 15x 10mm
- Model #: 11-001-065
Quick View
Enlabs PVCFL14CM10PK 140 mm Black PVC Mesh Dust Filter PC Cooler Fan Filter Dustproof Computer Case Cover,10 Pack
- Specifications: Material: PVC Color: Black Dimension:140 x 140mm/5.51 x 5.51"(L x W) Note: Installation screws are not included. Package Included: 10 x Dust Filter Mesh
- Color: Black
- Model #: PVCFL14CM10PK
Quick View
10pcs/lot Aluminum Heatsink 8.8x8.8x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
- Model #: 11-001-393
Quick View
iPad Mini 3,iPad Mini 2,iPad Mini 1 Case,Clear Soft TPU Transparent Gel Silicone Bumper Tab Case Skin Cover for Apple iPad Mini 1 / 2 / 3 7.9"
- Compatibility: iPad Mini 3
- Model #: 11-001-186BK
Quick View
2-in-1 Multi-Function Micro USB Host OTG Cable w/ USB Plug Power (OTG Cable + Power Cable), OTG & USB Power Charge Y Splitter Cable for 2.5" HDD/SSD for Samsung Galaxy Tab3 S4 Android Devices
- Type: Adapter
- Connector Type: Micro USB to USB A
- Features: OTG cable allow you add an extra female USB port to host device so that it can connect USB storage, keyboard / mouse, USB hub, and USB Ethernet adapter and more via this female USB port. Create a simple way to connect mobile devices to a USB capable computer for
- Model #: OTGMICROBPW
Quick View
10pcs/lot Aluminum Heatsink11x11x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
- Model #: 11-001-394
Quick View
10-Pack ITHOO SATA Powered PCI-E PCI Express Extender Riser Cable- VER 007S - 1X to 16X PCIE USB 3.0 Adapter Card w/ 2ft USB Extension Cable - GPU Graphic Card Crypto Currency Mining
- Type: Internal power cable
- Type: Riser Cable
- Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. SATA 15 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 007S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign
- Model #: 3910003