Your Browsing History
- In Stock
Quick View
4 Solid Capacitors VER 006C PCIe 1x to 16x PCI Express Extender Powered Riser Card,Ethereum Mining ETH GPU Riser Adapter Power by PCIe 6pin w/ 60cm USB 3.0 Extension Cable& 6-Pin PCI-E to SATA Power C
- Type: PCI Express Controller Card
- External USB Ports: 16x USB Ports
- Package Contents: 1x PCI-E 16X riser board 1x PCI-E 1X adapter card 1x 60cm USB 3.0 cable 1x 6-pin PCI-E power to 15-pin SATA power cable
- Model #: 311009
Quick View
10pcs/lot 20x20x0.8mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
- Dimensions: 20mm x 20mm x 0.8mm
- Model #: 11-001-271
Quick View
20pcs/lot Aluminum Heatsink 11*11*5mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
- Di...
- Model #: 11-001-049
Quick View
10pcs/lot Aluminum Heatsink 20*20*6mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
- Dim...
- Model #: 11-001-060
Quick View
3.5" USB 3.0 2 Ports Front Panel & PCIe to USB 4 Ports(2 USB Type-A+USB Internal 20pin) Expansion Card Kit w/ Low-Profile PCI Bracket, PCIe Express to 2 USB3 & Internal 20Pin to USB Splitter Cable-2FT
- Type: Controller Card
- External USB Ports: 2 Ext / 2 Int
- Internal USB Ports: 2x USB Ports
- External 1394 Ports: N/A
- Model #: PCIEU3220KITSSU
Quick View
2pcs Black 40x40x11mm Aluminum Heat Sink Radiator Heatsink for CPU,GPU, Electronic Chipset heat dissipation
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
- Dimensions: 40 x 40x 11mm
- Model #: 11-001-191
Quick View
Black Net Jacket Sleeved 6 inch 1 to 2 Motherboard 4-pin Molex CPU Case 4 Pin PWM Cooling Fan Splitter Hub Power Adapter Cable
- Type: Fan splitter cable
- Length: 6 inches
- Connector Number: 3
- Model #: 121014
Quick View
2x6mm Copper heatpipe Heatsink with Dua 80mm 3pin Fan CPU Cooler Radiator for AMD Socket 754/939/AM2/AM2+/AM3/FM1 Intel LGA 775/1156/1155/115X
- Brand: PC Cooler
- Fan Size: 80mm
- Bearing Type: Hydraumatic Bearing
- Type: Fan & Heatsinks
- Model #: PCCMINIPLUS
Quick View
10pcs 15x15x0.1/0.3/0.4/0.5/0.6/0.8/1.0/1.2mm Combo DIY Copper Heatsink thermal Pad,Laptop CPU VGA Chip RAM Memory chips Cooler
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
- Dimensions: 15x15mm
- Model #: CU-PAD-KIT
Quick View
10pcs/lot Aluminum Heatsink11x11x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
- Model #: 11-001-394
Quick View
50pcs/lot Aluminum Heatsink 8.8*8.8*5mm Electronic Chip Radiator Cooler w/ 3M9448a Thermal Double Sided Adhesive Tape for IC,3D Printer,Motherboard,GPU,Xbox Cooling
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
- Model #: 11-001-046
Quick View
New 50pcs Silver 14x14x6mm Aluminum Heat Sink Radiator Heatsink for IC, CPU,GPU, Electronic Chipset heat dissipation
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink Material : Aluminium Color : Silver Tone Overall Size : 14 x 14x 6mm/ 0.55" x 0.55" x 0.24" (L*W*H) Weight : 100g Package Content : 50 x Heatsink
- Dimensions: 14 x 14x 6mm
- Model #: 11-001-192(50)
Quick View
New Premium 10pcs/lot 15x15x0.6mm DIY Copper Shim Heatsink thermal Pad for Laptop GPU CPU VGA Chip RAM Memory chips Copper Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.6mm
- Dimensions: 15mm x 15mm x 0.5mm
- Model #: 11-001-268
Quick View
EnLabs USB 3.1 5Gbps Type-C to M.2 NGFF (SATA) SSD Adapter Converter Enclosure for Socket 2 B/B+M Key NGFF - SATA-Bus 2280 2260 2242 2230 M.2 (NGFF) to USB-C - Black Aluminum Housing
- Material: Aluminum
- Number of Bay: 1
- Package Contents: 1 x M.2 NGFF(Socket 2 SATA Channel)SSD to USB-C enclosure 1x Screw Driver. 1ft USB-A to USB-C male-male cable
- Size: M.2 SATA
- Model #: ENNGFF2U35GC
Quick View
Black Net Jacket Sleeved 12 inch 1 to 2 Motherboard 3pin CPU Case Fan Power Splitter Hub Adapter Cable
- Type: Power Splitter
- Type: Cable Splitters
- Color: Black
- Length: 11" - 15"
- Model #: 3PINSPL212
Quick View
EnLabs Solar Eclipse Serial 12CM Light Loop PC Computer 16dB Ultra Silent 4pin+3pin Case Fan w/ Anti-Vibration Rubber Pads,120x120x25mm Case Fan w/ Red LED
- Type: Case Fan
- Bearing Type: Sleeve
- RPM: 1200RPM+/- 10%
- Air Flow: 50-55 CFM
- Model #: SR12025RD
Quick View
New Premium 10pcs/lot 15x15x1.5mm DIY Copper Shim Heatsink thermal Pad for Laptop GPU CPU VGA Chip RAM Memory chips Copper Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 1.5mm
- Dimensions: 15mm x 15mm x 1.5mm
- Model #: 11-001-269
Quick View
High Power 160x80x26.9mm Aluminum Extruded Heat Sink Radiator Heatsink for IC LED Electronic Chipset heat dissipation
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink; Material : Aluminium Color : Silver Tone Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H) Weight : 410g Package Content : 1 x Heatsink
- Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
- Model #: 11-001-331