Security: UEFI Secure Boot and Secure Start support
Tamper-free updates - components digitally signed and verified
Immutable Silicon Root of Trust
Ability to rollback firmware
FIPS 140-2 validation
Secure erase of NAND/User data
Common Criteria certification
Configurable for PCI DSS compliance
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
Support for Commercial National Security Algorithms (CNSA)
Secure Recovery - recover critical firmware to known good state on detection of compromised firmware
Specifications: Cable Length: 16.40 ft.
Connector on First End: SFP+
Connector on Second End: SFP+
Conductor: Copper
*For more Compatibility information, Please visit HP website.
Specifications: Platform supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
Weight: 0.08 kg (0.181 lb)
Dimensions: 30.5 x 21.5 x 1 cm (12.01" x 8.46" x 0.39")
Specifications: Drive type: 1x HPE StoreEver LTO-9 Ultrium 45000 Internal Tape Drive
Transfer rate:
300 MB/s using LTO-9 Ultrium drives
30 MB/s using RDX removal hard disk drives.
Host interface: 12 MB/s SAS, 6 MB/s SAS or USB 3.0
WORM capability: Yes
Encryption capability: AES 256-bit
Recording technology: LTO Ultrium
Capacity: 45 TB compressed 2.5:1 maximum
Form factor: 1U
Weight: 8.6 kg (19 lb)
Dimensions: 4.32 x 42.88 x 64.14 cm (1.7 x 19 x 25.3 in)
Specifications: Transfer rate: 300 MB/s
Number of cartridge slots: 40 slots for the base module
Maximum drives per enclosure: 1 half-height (HH) LTO-9 drive included, expandable up to 3 HH drives
Host interface: 12 GB/s SAS (LTO-9)
Encryption capability: AES 256-bit
Form factor: 3U per module to a maximum of 48U
Dimensions: 13.3 x 48.2 x 87.3 cm (HxWxD) (5.24 x 18.98 x 34.27 in (HxWxD))
Interface: E0: Ethernet wired network port (RJ-45)
USB 2.0 host interface (type A connector)
Serial console interface (proprietary, micro-B USB physical jack)
Kensington security slot.