ESP32-S3 microcontroller, 2.4GHz Wi Fi development board, 240MHz dual core processor ESP32-S3-WROOM-1-N8R8 module(S3-DEV-KIT-N8R8)

Development Environment Settings
By default, the next development system is Windows. ESP-IDF
It is recommended to use VSC plug development. Developing using vscodeInstall VSCode
1. Open the download page of the VSCode official website, select the corresponding system and the system bit to download.
1. Open the official software download website and select the corresponding system and system bit to download.
https: //raw. githubusercontent. com/espressif/arduino-esp32/gh-pages/package_esp32_index. json
Micropiton PitonFirmware Flash
1. Click here to download firmware and burner. 2. Extract the previously downloaded package and input it.
Instalar Thonny
1. AbiertoSitio web oficial de Thonny.
Obtener la demostracin
1. Haz clic aqu para descargarLa demostracin. 2. Descomprima el archivo zip de demostracin.
ResourceSchematic
ESP32-S3-DEV-KIT-N8R8 SchematicDemo
MicroPython DemoSoftwareESP32-S3
Flash software & MicroPython firmware
Thonny Python IDE (Windows V 3.3. 3)CH343
Window VCP driver
Android APP
MAC driverUART
SSCOM Serial Assistant
DatasheetESP32-S3
ESP32-S3 Technical Reference Datasheet
ESP32-S3 Datasheet
ESP32-S3-WROOM-1 DatasheetMicroPython Official Document
MicroPython Official Document
FAQ
Question: After power on, the recognized serial port devices and USB ports keep restarting?
Answer:
Check if the power supply voltage of the USB port is less than 5V. Generally, the power supply voltage of the USB port is above 4.9V, and both USB ports of the module can be used normally. If it is lower than 4.9V, there may be insufficient power supply and USB port disconnection. In this case, it is necessary to replace the USB port with sufficient voltage.