Specifications: Audio Specifications: HDMI and mDP output - 7.1 surround sound
General Specifications: Only one video output is supported on the video adapter at a time. If multiple connections are made, only one of the outputs will function.
Maximum Analog Resolutions: 1920 x 1200
Maximum Digital Resolutions: 3840 x 2160
Supported Resolutions:
HDMI and mDP output: 3840 x 2160, 2560 x 1600, 1920 x 1200, 1920 x 1080, 1280 x 720
DVI and VGA output: 1920 x 1200, 1920 x 1080, 1280 x 720
Video Revision: DisplayPort 1.2
Wide Screen Supported
Humidity: 40%-50%RH
Operating Temperature: 0°C to 70°C (32°F to 158°F)
Storage Temperature: -10°C to 80°C (14°F to 176°F)
Specifications: Ports: 1
Input Current: 1.5A
Input Voltage: 100 - 240 AC
Output Current: 3A
Output Voltage:
5V DC
9V DC
12V DC
15V DC
20V DC
Power Consumption (In Watts): 60W
Power Delivery: 60W
Connector A: 1 x NEMA 1-15 Power (North America) Male
Specifications: An economical wiring solution. Carries both data and power over a single Ethernet cable
Powers 802.3at and 802.3af compliant devices
Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs
Enables you to avoid installing AC power at a remote camera, access point, or thin client
Move equipment from room to room without costly, time-consuming rewiring
Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output
Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications)
Diagnostic LEDs indicate 802.3at device detection and alert you to faults
Backward compatible with 802.3af standard equipment
Simple plug-and-play insta...
Specifications: Maximum Analog Resolutions: 2048 x 1280p @ 60Hz
Maximum Data Transfer Rate: 5 Gbps (USB 3.0)
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes
Specifications: SATA 15 Pin male to Molex 4 pin female adaptor
Easy migration to SATA power
Convert an existing SATA power connector to molex power connector
Specifications: 15 ft. USB-C to DisplayPort Cable - 4K 60Hz
The USB-C to DisplayPort cable provides a solution to connect USB-C devices that support DisplayPort alternate mode (DP alt mode) to DisplayPort displays. The 6 feet length efficiently connects MacBooks, Chromebooks, and other USB-C devices that support DisplayPort Alternate Mode (DP Alt Mode) to displays without needing an additional DisplayPort cable.
4K / 60Hz Resolution
Support for resolutions up to 4K / 60Hz allow you to output onto 4K monitors to display Ultra HD resolutions up to 3840x2160 / 60Hz. Perfect for streaming HD content and playing Blu-ray media. The 6ft length also provides a longer length for use with a wide variety of setups. The DisplayPort male end also eliminates the ...
Specifications: Audio Specifications: 7.1 surround sound
Maximum Analog Resolutions: 1920 x 1200 or 1080p
Maximum Digital Resolutions: 3840 x 2160 @ 30 Hz
Supported Resolutions:
1024 x 768
1280 x 720 (High-definition 720p)
1920 x 1080 (High-definition 1080p)
1920 x 1200
2560 x 1440
2560 x 1600
3840 x 2160 (Ultra HD 4K)
Wide Screen Supported: Yes
Specifications: System Requirements:
Any USB-enabled operating system
Available USB-C port (USB 3.1 required to achieve USB 3.1 speeds)
2.5 in. or 3.5 in. SATA drive
UASP-enabled host controller required for UASP performance
Operating Temperature Range: 50 to 122 degree F (10 to 50 degree C)
Storage Temperature Range: 32 to 149 degree F (0 to 65 degree C)
Specifications: This coupler links two fiber optic cables with LC connectors for duplex or simplex cable assemblies in a faceplate or keystone panel.
Dual LC/LC coupler for extending cables in a faceplate or keystone panel
High-precision mating structure with low insertion loss
Duplex adapter accepts two simplex connectors or one duplex connector
Works with 62.5/125 or 50/125 multimode fiber cables
Specifications: Cat. 8 RJ45 Tool Less Termination Plug for 40G:
Cat.8 RJ45 connectors are designed to work specifically with Cat.8 Cable, the RJ45 contacts are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable striper to expose the inner conductors. The hosing of the connectors is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: Cat.8 RJ45 Tool Less Keystone Jack for 40G:
These Cat.8 RJ45 Jacks are designed to work specifically with Cat.8 Solid cable, the contacts on the keystone jack are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable-cutter to trim off excess wire.The hosing of the keystone Jack is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: Connect A: USB 3.1 Type-C Male
Connect B: HDMI Female
Type: USB Type-C to HDMI Adapter
Compatible Devices for USB 3.1 Type-C with DP Alt Mode or Thunderbolt 3 (not a full list)
PC:
MacBook 2015 and newer/ MacBook Pro 2016 and newer/ iMac 2017 and newer/ iMac Pro 2017 and newer
MacBook Air 2018/ iPad Pro 2018 / New Mac Mini
Dell XSP 15/13
ASUS T303ua/ ZenBook 3
Lenovo YOGA900/910/920 / Lenovo Thinkpad X1 Carbon 5th
Chromebook Pixel 2
HP EliteBook Folio G1/ Spectre 13 X360
Huawei Matebook
And more...
Smartphones:
Huawei Mate 10
Samsung Galaxy S8/S8+/S9 / Samsung Galaxy Note8/9
Microsoft Lumia 950 / LG G5 / V20 / V30
And more...
Type: Connectors Input Interface: (8) DisplayPort or HDMI;
Output Interface: (2) DisplayPort or HDMI
Connectors (USB) Input Interface: (4) USB Type-B;
Output Interface: (2) USB 1.1 Type-A for KM Devices;
Emulation: USB 1.1 and USB 2.0 Compatible
Computer Connections: Connectors Input Interface: (8) DisplayPort or HDMI;
Output Interface: (2) DisplayPort or HDMI
Connectors (USB) Input Interface: (4) USB Type-B;
Output Interface: (2) USB 1.1 Type-A for KM Devices;
Emulation: USB 1.1 and USB 2.0 Compatible
Monitor Connections: Connectors Input Interface: (8) DisplayPort or HDMI;
Output Interface: (2) DisplayPort or HDMI
Connectors (USB) Input Interface: (4) USB Type-B;
Output Interface: (2) USB 1.1 Type-A for KM Devices;
Emulation: USB 1.1 and USB 2.0 Compatible