The Phanteks T30-120 Triple-Pack is a set of three 120mm, 30mm-thick 4-pin PWM case fans for builders seeking high airflow across a PC case, radiator, or heatsink, with selectable 1200, 2000, and 3000 RPM modes. Check that your case or radiator has clearance for the thicker-than-standard frame.
Recommended For
- Builders cooling a 120 mm radiator or AIO who want strong airflow through a restrictive surface and are willing to check clearance for the fan’s 30 mm thickness.
- PC builders using dust-filtered intakes or other airflow-restricted case positions who want a fan designed to maintain airflow against resistance.
- Enthusiasts who want to tune fan behavior for quieter everyday use or higher cooling output under load, using the onboard Hybrid, Performance, and Advanced profiles.
- Builders prioritizing cooling performance at a chosen noise level, such as gaming or workstation users who want to balance temperatures and fan noise through PWM tuning.
Real-World Use Scenarios
- When replacing fans on a liquid-cooling radiator, a builder can use the T30s to move air through the radiator and adjust the fan curve to balance cooling with noise; independent testing found strong airflow performance under radiator restriction.
- In a case with restrictive dust filters, a user can install the fans as intake to bring air into the system; their design is intended for restricted airflow, though the case must have room for the fans’ 30 mm thickness.
- For everyday gaming or desktop use, a builder can set a moderate fan curve rather than run the fans at full speed; community reports describe low-speed use as unobtrusive, while higher speeds make airflow noise more noticeable.
- When a high-load task raises system temperatures, a user can let the PWM curve ramp the fans up for extra airflow, then slow them back down when demand falls; the faster setting can be noticeably louder.
- In a compact PC build, a user can use the triple-pack for radiator or case airflow if the layout supports standard 120 mm mounting; they should check clearance first because the fans are thicker than typical 25 mm models.
Spec Summary
| Attribute | Value |
|---|
| Best For | Desktop PC case cooling with a three-fan setup; compatible with cases |
|---|
| Fan Configuration And Dimensions | Three 120 mm case fans, each 30 mm thick (120 × 120 × 30 mm) |
|---|
| Cooling Performance | 1200–3000 RPM, with 39.1–101.0 CFM airflow and 11.1–39.7 dBA noise; Vapo Bearing |
|---|
| Materials And Construction | LCP frame and blades with rubber dampeners; materials also listed as glass fiber and LCP |
|---|
| Power And Electrical | 4-pin power connection; 12 V rated voltage, 10.2–13.2 V operating range, 0.36 A maximum current, and 4.32 W maximum power |
|---|
| Controls And Lighting | No fan controller; no DRGB lighting |
|---|
| Safety And Reliability | UL Class A insulation, UL-94V-0 flame retardancy, and 150,000-hour MTTF |
|---|
| Package Contents | Three T30-120 fans, three 4-pin extension cables, 12 fan screws, 12 36 mm radiator screws, and 12 39 mm radiator-plus-Halos screws |
|---|
| Model Identifiers | Phanteks PH-F120T30_BG_3P |
|---|
All Categories
