M.2 PCIe SSD
CARDEA ZERO Z440
The aesthetic of thinness — releasing the ultimate performance
Adopts latest ultra-fast PCIe Gen4 x4 interface, supports NVMe 1.3 specs, and is equipped with DRAM Cache to push read/write speeds to over 5,000/4,400MB/s[1]. Patented ultra-thin graphene heat spreader can effectively eliminate devices interference during installation. It can be installed on all major motherboard and M.2 slots. The aesthetic of thinness of T-FORCE is created and the ultimate performance is also released at the same time.
[1] The performance result is tested on a motherboard that supports PCIe 4.0 interface by the T-FORCE internal laboratory. The actual speed may vary depending on the software and hardware conditions of the platform.
3D NAND + PCIe 4.0 — capacity and performance progress greatly
The 3D flash memory is stacked in a three-dimensional way to offer up to 1TB/2TB of large storage.
In addition, it is downward compatible with the PCIe 3.0 platform, comprehensively improving gamer’s gaming experience and satisfying the demand for various large-scale data computing tasks.
Well-proportioned — transfer heat source together
Patented ultra-thin graphene heat spreader can effectively eliminate both waste heat and device interference during installation. It can be installed on all major motherboard and M.2 slots. Even without the cooling module of the motherboard, it can still transfer heat source effectively, allowing gamers to enjoy high-speed performance.
Patented ultra-thin graphene heat spreader — great heat dissipation performance
After T-FORCE’s long-term and rigorous internal laboratory tests and burn-in test, Patented ultra-thin graphene heat spreader has been developed and is able to provide more than 9%[2] of cooling effect during actual continuous reading/writing for over 3 hours, perfectly showcasing an excellent heat dissipation performance.
[2] The experimental data is based on T-FORCE internal laboratory's test result. Under the same condition, the temperature test data is according to the comparison of the non-heat spreader M.2 PCIe Gen4 x4 SSD and the T-FORCE CARDEA ZERO Z440 SSD. The relevant test environment is simulated under a fanless environment using mask. The actual speed may vary depending on the software and hardware conditions of the platform.
Smart management technology — trustworthy reliability
The built-in smart algorithm management mechanism has functions such as GC (garbage collection), TRIM command, LDPC (Low Density Parity Check Code) error correction mechanism, E2E Data Protection, etc. which are able to help in operation efficiency, prolong the service life of the SSD, while also allowing gamers to ensure data security, maximize its performance and the stability of data transfer.
Specification
Interface | PCIe Gen4 x4 with NVMe 1.3 |
Capacity | ITB / 2TB[1] |
Voltage | DC +3.3V |
Operation Temperature | 0°C ~ 70°C |
Storage Temperature | -40°C ~ 85°C |
Terabyte Written (TBW? |
1TB-1,800TBW 2TB-3,600TBW[2] |
Performance |
Crystal Disk Mark: 1TB Read/Write: up to 5,000/4,400 MB/s 2TB Read/Write: up to 5,000/4,200 MB/s[3] IOPS: 1TB Read/Write: 750K/750K IOPS Max 2TB Read/Write: 750K/750K IOPS Max[3] |
Weight | 9g |
Dimensions | 80.0(L) x 22.0(W) x 3.7(H) mm |
Humidity | RH 90% under 40°C (operational? |
Vibration | 80Hz ~ 2,000Hz/20G |
Shock | 1500G/0.5ms |
MTBF | 1,700,000 hours |
Operating System |
System Requirements:
|
Warranty | 5-year limited warranty[5] |
[1] 1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024=0.93GB.
[2] Definition and conditions of TBW (Terabytes Written) are based on JEDEC standard.
[3] Transmission speed will vary according to different hardware/software conditions, therefore the data can only use for basic reference.
[4] PCIe SSD works best under WIN8.1 and WIN10 operating system. Windows Operating Systems earlier than Windows 8.1 does not support NVMe Driver natively. Users will need to install NVMe Driver prior installing the SSD.
[5] The SSD is based on the TBW or Warranty period.
* All the test data is provided by TEAMGROUP'S laboratory, and the information of test data is only for reference. We reserve the right to modify product specifications without prior notice.