Specifications: Cat. 8 RJ45 Tool Less Termination Plug for 40G:
Cat.8 RJ45 connectors are designed to work specifically with Cat.8 Cable, the RJ45 contacts are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable striper to expose the inner conductors. The hosing of the connectors is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: An economical wiring solution. Carries both data and power over a single Ethernet cable
Powers 802.3at and 802.3af compliant devices
Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs
Enables you to avoid installing AC power at a remote camera, access point, or thin client
Move equipment from room to room without costly, time-consuming rewiring
Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output
Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications)
Diagnostic LEDs indicate 802.3at device detection and alert you to faults
Backward compatible with 802.3af standard equipment
Simple plug-and-play insta...
Specifications: SATA 15 Pin male to Molex 4 pin female adaptor
Easy migration to SATA power
Convert an existing SATA power connector to molex power connector
Specifications: Maximum Digital Resolutions: 3840 x 2160 @ 60Hz
Supported Resolutions:
3840 x 2160 @ 60Hz
2560 x 1600
2048 x 1280
1920 x 1200
1920 x 1080
1280 x 720
1680 x 1050
1600 x 900
1440 x 900
1360 x 768
1280 x 800
1280 x 768
Wide Screen Supported:Yes
Humidity: 0~90% RH
Operating Temperature: 0 C to 40 degree C
Storage Temperature: -20C to 70 degree C
Output Connector: 1 x USB-C (24 pin) DisplayPort Alt Mode Male Input
1 x DisplayPort (20 pin) Female Output
Specifications: Audio: Yes
Chipset ID: STDP4320
Converter Type: MST Hub
Output Signal: HDMI
Ports: 2
Maximum Digital Resolutions: 3840x2160 @ 30 Hz
Supported Resolutions:
Note: MST shares 21.6 Gbps across all attached displays. Higher resolutions can restrict the available bandwidth with the remaining ports, please see our guideline below for determining an ideal resolution for your setup.
Average resolution bandwidth allocation
1920 x 1080 (High-definition 1080p) @60 Hz - 22%
1920 x 1200 @60hz - 30%
2560 x 1440 @60hz - 35%
2560 x 1600 @60hz - 38%
3840 x 2160 (Ultra HD 4K) @30 Hz - 38%
Note: Exceeding 100% will reduce functionality.
Wide Screen Supported: Yes
Connector A: 1 x USB-C (24 pin) DisplayPort Alt Mode Male Input
Specifications: Output Signal: VGA
Maximum Analog Resolutions: 1920 x 1200
Maximum Digital Resolutions: PC resolutions up to 1920 x 1200 @ 60 Hz
Connector Type(s): 1 x USB Micro-B (5 pin) Female
Power Source: USB-Powered
Humidity: 40 - 85%RH
Operating Temperature: 0 to 60 degree C (32 to 140 degree F)
Storage Temperature: -10 to 70 degree C (14 to 158 degree F)
Specifications: Converter Type: Passive
Output Signal: DVI-D (DVI Digital)
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)
Type: Connectors Input Interface: (8) DisplayPort or HDMI;
Output Interface: (2) DisplayPort or HDMI
Connectors (USB) Input Interface: (4) USB Type-B;
Output Interface: (2) USB 1.1 Type-A for KM Devices;
Emulation: USB 1.1 and USB 2.0 Compatible
Computer Connections: Connectors Input Interface: (8) DisplayPort or HDMI;
Output Interface: (2) DisplayPort or HDMI
Connectors (USB) Input Interface: (4) USB Type-B;
Output Interface: (2) USB 1.1 Type-A for KM Devices;
Emulation: USB 1.1 and USB 2.0 Compatible
Monitor Connections: Connectors Input Interface: (8) DisplayPort or HDMI;
Output Interface: (2) DisplayPort or HDMI
Connectors (USB) Input Interface: (4) USB Type-B;
Output Interface: (2) USB 1.1 Type-A for KM Devices;
Emulation: USB 1.1 and USB 2.0 Compatible
Specifications: Center Tip Polarity: Positive
Input Current: 0.8 A
Input Voltage: 100 ~ 240 AC
Output Current: 2 A
Output Voltage: 9 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: Cat.8 RJ45 Tool Less Keystone Jack for 40G:
These Cat.8 RJ45 Jacks are designed to work specifically with Cat.8 Solid cable, the contacts on the keystone jack are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable-cutter to trim off excess wire.The hosing of the keystone Jack is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: Center Tip Polarity: Positive
Input Current : 0.5 A
Input Voltage: 110 ~ 240 AC
Output Current: 3A
Output Voltage: 5 DC
Plug Type: N
Power Source: AC Adapter Included
Connector A: 1 - Mini-DisplayPort (20 pin) Male Output
Specifications: Applicable for 22~26AWG Cat.8 Cable
Wire OD 1.35 ~ 1.4mm
Cable jacket diameter 6.5mm ~ 8.5mm
Compatible with solid or stranded wire
Tool is required to terminate
Supports 40Gbps ( 4 times faster than Cat.6A )
Excellent performance with POE++ applications
UL/RoHS
20 Packs