Ind Media Converter, 10/100/1000Base-T t

The Transition Networks industrial media converter connects 10/100/1000Base-T copper Ethernet to a 100/1000Base-X SFP link, making it suitable for network installers extending Ethernet over fiber in industrial environments.

Recommended For

• Industrial network installers connecting copper Ethernet equipment to fiber in factory, outdoor-cabinet, or other harsh-temperature deployments; this hardened converter is rated for -40°C to +75°C.
• Network technicians extending a 10/100/1000Base-T connection over fiber who want to select an SFP to match their fiber type and link requirements; this model has an SFP slot, but the SFP module is not included.
• Control-system and plant-network integrators linking PLCs, HMIs, or other Ethernet devices across fiber in manufacturing or similar industrial environments.
• Installers fitting a single copper-to-fiber link into an industrial cabinet who need DIN-rail mounting and a hardened, unmanaged device rather than a multiport switch.

Real-World Use Scenarios

• In a factory network, an installer can connect a copper Ethernet device to a fiber backbone using a compatible SFP; this bridges the two media types and can extend the link beyond a copper run’s reach.
• When adding a networked device in a plant area that is beyond the practical reach of the existing copper run, a compatible fiber SFP can carry the connection over fiber; the achievable distance depends on the selected SFP and fiber.
• In a factory, oil-and-gas site, or chemical facility, the converter can be mounted on a DIN rail in suitable equipment housing to connect local Ethernet equipment to fiber; its hardened design is intended for demanding industrial conditions.
• In an industrial cabinet with two DC power sources, connecting both inputs can provide backup power if one source fails; the installer still needs to provide suitable DC power, as the converter ships without a power cord.
• For an installation exposed to wide temperature swings, such as an industrial enclosure, the converter is specified for operation from -40°C to 75°C; the actual link still depends on a compatible SFP, fiber, and correct installation.

Spec Summary