Specifications: Cat. 8 RJ45 Tool Less Termination Plug for 40G:
Cat.8 RJ45 connectors are designed to work specifically with Cat.8 Cable, the RJ45 contacts are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable striper to expose the inner conductors. The hosing of the connectors is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: An economical wiring solution. Carries both data and power over a single Ethernet cable
Powers 802.3at and 802.3af compliant devices
Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs
Enables you to avoid installing AC power at a remote camera, access point, or thin client
Move equipment from room to room without costly, time-consuming rewiring
Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output
Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications)
Diagnostic LEDs indicate 802.3at device detection and alert you to faults
Backward compatible with 802.3af standard equipment
Simple plug-and-play insta...
Specifications: Cat.8 RJ45 Tool Less Keystone Jack for 40G:
These Cat.8 RJ45 Jacks are designed to work specifically with Cat.8 Solid cable, the contacts on the keystone jack are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable-cutter to trim off excess wire.The hosing of the keystone Jack is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: LC connector insertion loss is 0.3 dB (max.) at 850/1300 nm.
MTP connector insertion loss is 0.75 dB (max.) at 850/1300 nm.
Made especially for the High-Density 108 LC Enclosure (FOEN50HD-3H-1U).
Specifications: Applicable for 22~26AWG Cat.8 Cable
Wire OD 1.35 ~ 1.4mm
Cable jacket diameter 6.5mm ~ 8.5mm
Compatible with solid or stranded wire
Tool is required to terminate
Supports 40Gbps ( 4 times faster than Cat.6A )
Excellent performance with POE++ applications
UL/RoHS
20 Packs
Type: 4-Port Industrial USB to RS-232/422/485 Serial Adapter
Color: Black
Changer Type: USB to RS-232/422/485 Serial
Specifications: Converts a single USB port into four RS232/RS422/RS485 serial ports over USB 2.0 with four modes: RS232, RS422, 4-wire and 2-wire RS485
15 kV ESD protection (Level 4) against noise emissions and electrical voltage surges
DIN rail and wall mountable
Rugged IP30 rated metal hub housing and screw-locking host connection, ideal for harsh industrial environments
Data transfer baud rate up to 921.6Kbps
COM port expansion with COM retention
Powered by USB, and features plug-and-play installation
Specifications: Female USB-C to male USB-A connects your smartphone, tablet or Ultrabook to your laptop or computer.
Data transfer speeds up to 5 Gbps - 10 times faster than USB 2.0
Supports power output up to 900mA
Reversible USB-C port provides fumble-free connection
Gold-plated contacts for maximum conductivity and minimum data loss
Backward compatible with previous USB generations
Specifications: Converter Type: Passive
Output Signal: DVI-D (DVI Digital)
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)
Specifications: System Requirements:
Any USB-enabled operating system
Available USB-C port (USB 3.1 required to achieve USB 3.1 speeds)
2.5 in. or 3.5 in. SATA drive
UASP-enabled host controller required for UASP performance
Operating Temperature Range: 50 to 122 degree F (10 to 50 degree C)
Storage Temperature Range: 32 to 149 degree F (0 to 65 degree C)
Specifications: 4K Support: Yes
Audio: Yes
Bus Type: USB-C
Chipset ID: VLI - VL812 (USB 3.0 Hub), VLI - VL100 (USB Power Delivery), PS - PS171 (DVI), Realtek - RTL8153 (LAN)
Displays Supported: 1
Fast-Charge Port(s): No
Industry Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab; USB 3.0 - Backward compatible with USB 2.0 and 1.1
Auto MDIX: Yes
Compatible Networks: 10/100/1000 Mbps
Full Duplex Support: Yes
Maximum Data Transfer Rate: 5 Gbps (USB 3.0); 2 Gbps (Ethernet; Full-Duplex)
Maximum Digital Resolutions: 1920 x 1200 - 60 Hz (DVI)
Maximum Power Delivery Support: 60W
Output Signal: DVI-D (DVI Digital)
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes
Connector Type(s): 1 x USB Type-C (24 pin) USB 3.0 Male
OS Compatibility: Windows 7, 8.1, 10 / Mac OS 10.11 to 10.12 / Chrome OS
Note:
Not all...
Type: USB-C Hub with USB-A, USB-C and Power Delivery
Color: Black
Cable Length: 5 in.
Specifications: The USB-C Hub with USB-A, USB-C and Power Delivery expands USB capabilities by providing two USB-A ports and two USB-C ports for connecting peripherals to a single USB-C port. This hub connects to a USB-C or Thunderbolt 3 enabled laptop, tablet, or desktop computer and features USB-C power delivery, making it ideal for charging mobile devices or transferring data while in the office or on the road.
Convenience
Small, lightweight and portable, the hub is easily stored in a laptop case or pocket. With a transfer rate up to 5Gbps, it is fully USB 3.0 (USB 3.1 Gen 1) compliant, backwards compatible with USB 2.0 and USB 1.1 devices, and supports all USB peripherals, including keyboards and mice, smartphones, tablets, and other USB devices.
Per...