Your Browsing History

Make informed decisions with expert advice. Learn More
| Brand | PLANET |
|---|---|
| Model | IGS-620TF |
| Format | DIN Rail Kit and Wall Mount Ear |
|---|---|
| Standards | IEEE 802.3 Ethernet / 10Base-T IEEE 802.3u Fast Ethernet / 100Base-TX IEEE 802.3ab Gigabit Ethernet / 1000Base-T IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX IEEE 802.3x Full-Duplex Flow Control |
| Network Management Type | Unmanaged |
| Primary Ports | 4 x RJ45 + 2 x SFP |
|---|---|
| Primary Port Speed | 10/100/1000Mbps |
| MAC Address Table | 1K |
|---|---|
| Switching Method | Store and Forward |
| Jumbo Frames | 9216 bytes |
| LEDs | 3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Green: Power Fault 2 x LED for Per Copper Port (Port-1~Port-4): Green: 1000 LNK/ACT Orange:100 LNK/ACT 1 x LED for Per mini-GBIC interface (Port-5 and Port-6): Green: LNK/ACT |
|---|---|
| Power | DC 12 - 48V or AC 24V Redundant power with polarity reverses protection function 7.2watts / 24BTU |
| Features | Physical Port: 4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured Fiber Port Redundancy: Link status auto-detect and redundant on Dual ports with the same connector type Only Primary-Port is active at a time, the Backup-Port is blocked When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically. Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port. Layer 2 Features: Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex) 9K Jumbo Frame Size support Backplane (Switching Fabric): 12Gbps Integrated address look-up engine, support 1K absolute MAC addresses Automatic address learning and address aging CSMA/CD Protocol Industrial Case / Installation: Slim IP30 metal case protection DIN Rail and Wall Mount Design Redundant Power Design: 12 to 48V DC, redundant power with polarity reverse protect function AC 24V power adapter acceptable Supports EFT protection 6000 VDC for power line Supports 6000 VDC Ethernet ESD protection -40 to 75 degrees C operating temperature |
|---|
| Dimensions | 1.26" x 5.31" x 3.43" |
|---|---|
| Weight | 1.11 lbs. |
| Temperature | -40 - 75 degree Celsius |
|---|---|
| Humidity | 5% - 95%, Non-condensing |
| First Listed on Newegg | September 05, 2017 |
|---|
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.