Specifications: Cat.8 RJ45 Tool Less Keystone Jack for 40G:
These Cat.8 RJ45 Jacks are designed to work specifically with Cat.8 Solid cable, the contacts on the keystone jack are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable-cutter to trim off excess wire.The hosing of the keystone Jack is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: An economical wiring solution. Carries both data and power over a single Ethernet cable
Powers 802.3at and 802.3af compliant devices
Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs
Enables you to avoid installing AC power at a remote camera, access point, or thin client
Move equipment from room to room without costly, time-consuming rewiring
Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output
Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications)
Diagnostic LEDs indicate 802.3at device detection and alert you to faults
Backward compatible with 802.3af standard equipment
Simple plug-and-play insta...
Specifications: Applicable for 22~26AWG Cat.8 Cable
Wire OD 1.35 ~ 1.4mm
Cable jacket diameter 6.5mm ~ 8.5mm
Compatible with solid or stranded wire
Tool is required to terminate
Supports 40Gbps ( 4 times faster than Cat.6A )
Excellent performance with POE++ applications
UL/RoHS
20 Packs
Specifications: This coupler links two fiber optic cables with LC connectors for duplex or simplex cable assemblies in a faceplate or keystone panel.
Dual LC/LC coupler for extending cables in a faceplate or keystone panel
High-precision mating structure with low insertion loss
Duplex adapter accepts two simplex connectors or one duplex connector
Works with 62.5/125 or 50/125 multimode fiber cables
Specifications: Applicable for 22~26AWG Cat.8 Cable
Wire OD 1.35 ~ 1.4mm
Cable jacket diameter 6.5mm ~ 8.5mm
Compatible with solid or stranded wire
Tool is required to terminate
Supports 40Gbps ( 4 times faster than Cat.6A )
Excellent performance with POE++ applications
UL/RoHS
50 Packs
Specifications: Cat. 8 RJ45 Tool Less Termination Plug for 40G:
Cat.8 RJ45 connectors are designed to work specifically with Cat.8 Cable, the RJ45 contacts are gold plated, wire alignment insert provides an efficient termination without any need of tools, we do recommend to use a cable striper to expose the inner conductors. The hosing of the connectors is fully shielded to avoid corrosion and to protect from EMI (ElectroMagnetic interference).
Specifications: Simply pull the connector down over the cable jacket so that the insulated wiring goes through nose of the plug.
Inspect the wiring prior to crimping the connector. It's done in one step with the EZ-RJ45 Crimp Tool.
Make faster terminations and reduce wasted crimps and scraps.
Backward compatible with CAT5e and CAT3