MAIWO K3015 SATA 5 Bay Duplicator Dock for 2.5'' SSD, 5Gbps Transfer Rate, USB3.0 to SATA SSD Docking Station Cloner, with Clone Progress Digital Display, Support 6TB*5 Capacity

Main Features:

• This 5 Bay Docking Station supports 2.5" SATA HDD/SSD Hard Drive or Adapter with 2.5 inch SATA interface, NOT support 3.5 inch or IDE Hard Drive.
• Expand your storage space professionally,every disk supports external storage up to 6TB. Read and write up to five disks or SSDs simultaneously.
• Support offline clone function, 1:4 cloning, no need to connect the computer, just connect the power supply.
• Plug and Play, tool-free installation with fast and convenient access to the drive bays,no driver needed.
• Digital LED Indicator for cloning progress from 1% 2% to 100%, and if there is an error in one disk, the LED will flash, very clear working status to monitor the entire progress.
• Comes with an independent 12V/3A power supply.

User Guid

How to read&write

1. Put the 2.5" SATA HDD/SSDs in the slot of the dock
2. Switch the mode to"PM"
3. Switch the power "ON"
4. Connect the Power Supply
5. Connect PC with USB Cable

How to clone

1. Put the 2.5" SATA HDD/SSDs in the slot of the dock
2. Switch the mode to"Clone"
3. Switch the power "ON"
4. Press the clone button twice,cloning begins when there is "dididi",the digital LED start with 0%
5. When it shows 100%,there will be "didi" about 2-3 times,clone is complete

Note: the capacity of target HDD should equal to or be larger than the source HDD.