Skip to main content
  • $34.99
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    ModMyMods High-Speed Steel British Standard Thread Tap - 1/4"-19 BSPP (MOD-0005)

    • Looking to create a G1/4 thread on a liquid cooling component
    • We have the tool for this job!
    • Looking to create a G1/4 thread on a liquid cooling component?
    • Material: Steel
    • Color: Chrome
    +
    +
    Overview
    Specs
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    Want to make your own custom G1/4" threaded port, or does a G1/4" port need to be re-threaded? This industrial high-speed steel thread tap cuts the 1/4"-19 BSPP (British Standard Pipe Parallel) thread, which is the G1/4" thread used on PC water cooling components. It has a right-handed thread direction and an overall length of 2-7/16".

    Properties

    • Type: Thread tap
    • Thread: 1/4"-19 BSPP (G1/4")
    • Direction: Right hand
    • Material: High-speed steel
    • Recommended drill: 11.8 mm
    • Pieces in the pack: 1

    Cut your own G1/4" ports

    With this tap you can add a G1/4" port to a reservoir, a block, a distribution plate or any custom water cooling part, so standard fittings screw straight in. It also cleans up and re-cuts a damaged G1/4" thread.

    1/4"-19 BSPP is G1/4"

    G1/4" and 1/4" BSPP describe the same parallel pipe thread with 19 threads per inch. That is the thread on almost every fitting, radiator, block and reservoir in PC water cooling.

    Drill first, then tap

    Drill the hole with an 11.8 mm drill, the recommended drill size for this tap. Then hold the tap in a tap wrench by its square end, start it straight into the hole and turn it clockwise.

    High-speed steel

    The tap is made of industrial high-speed steel, so it keeps its cutting edges through many threads.

    Technical data

    • Part number: MOD-0005
    • Type: Thread tap
    • Thread: 1/4"-19 BSPP (G1/4")
    • Thread direction: Right hand
    • Overall length: 2-7/16"
    • Recommended drill size: 11.8 mm
    • Material: High-speed steel

    Notes

    • Turn the tap back a little every turn or two to break the chips, and use cutting fluid in metal.
    • Keep the tap square to the surface; a slanted thread will not seal on the O-ring of a fitting.

    In the box

    • 1x ModMyMods High-Speed Steel British Standard Thread Tap - 1/4"-19 BSPP

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    • Return for refund within: 30 days
    • Return for replacement within: 30 days
    • This item is covered by ModMyMods Return Policy

    Manufacturer Contact Info

    LOADING...