Your Browsing History
MTX Audio Terminator Series TNE212D 1,200-Watt Dual 12-Inch Sub Enclosure
- 5/8" MDF Construction
- Aviation Grade Carpet
- Embroidered Terminator Logo
- 1200W Max Power, 800W Peak Power, 400W RMS
MTX Dual 12" 1200W Sealed Enclosed Subwoofer
Overview
Perfect Starter System
The MTX TNE212D is an ideal solution for anyone looking to add bass to their vehicle's system without breaking their bank or going over the top. The TNE212D is the perfect combination of performance and value ensuring that enthusiasts of all types can enjoy the hard hitting bass that MTX has built its reputation on for 40 years.
Unbeatable Bass and Unmatched Performance
The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems.
Classic Look and Contemporary Style
The enclosure is wrapped in black aircraft grade carpet. The embroidered Terminator logo and large MTX Audio logos on the dustcaps ensure that everyone will know what brand you choose to ride with when you open your trunk. Just remember not to tell them how much you paid if your system is louder than theirs. No better deal exists in the world of car audio today. Pair this enclosure with a THUNDER500.1 mono block amplifier and you will be amazed at the bass it puts out.
MTX recommends using the THUNDER500.1to power the TNE212D enclosure for an awesome bass experience.
Features
- 5/8" MDF Construction
- Aviation Grade Carpet
- Embroidered Terminator Logo
- 1200W Max Power, 800W Peak Power, 400W RMS
Gallery
Specifications
| RMS Power (Watts) | 400 |
|---|---|
| Subwoofer | Dual 12" |
| Height | 14" |
| Width | 29.63" |
| Bottom Depth | 13.5" |
| Top Depth | 11.13" |
| Weight | 56 lbs |
The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12 inch sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier.
The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power.
Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra strength 5/8 inch MDF.
The Terminator subwoofers used in the enclosure include durable polypropylene dust caps that can survive the rigors of most trunks and are lightweight, allowing them to efficiently move using less power.
Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil and dissipate heat. The enclosure itself is made of extra strength 5/8 inch MDF.
- 1200 watt of max power, 400 watts RMS
- Rubber surround
- Polypropylene cone
- MTX audio logo on dustcap
- 2 inch aluminum single 4 ohms voice coil
- 48 ounce magnet
- Final impedance: 2 ohms
- Frequency response: 37 150 Hz
- 5/8 inch solid MDF construction
- Black carpeting covering the enclosure
- Terminator logo embroidered into carpet front
- Dimensions: 29.69 x 13.5 x 11.125 x 14 inches
- Manufacturer warranty: 1-year warranty
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Limited Warranty period (parts): 1 year
- Limited Warranty period (labor): 1 year
- Read full details
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Newegg.com's 30-Day Return Policy.
- Read full return policy for details.
Manufacturer Contact Info
- Support Phone: 1-800-225-5689
- View other products from MTX
LOADING...
LOADING...