Fluke 750P09 - Gage Pressure Module, 0 - 1500 psi (0 - 100 BAR), (0 - 10 MPA)

Fluke 750P09 - Gage
Pressure Module Parameter/Range: 0 - 1500 psi (0 - 100
BAR) Burst Rating: 3X Gage measurement model Digital communication to calibrators, no analog losses or errorsThe Fluke 750P09 Gage Pressure Module will turn your Fluke multifunction calibrator into a full-fledged pressure calibrator. This flexible module not only works with multifunction calibrators like the 725, 726, or 750 Series Calibrators but also extends the measurement range of Fluke pressure calibrators. Since this pressure module is calibrated independently, it can be swapped from one calibrator to another without a loss of accuracy or traceability. Fluke 750P Series Pressure modulesMeasuring pressure with Fluke 750P Series Pressure modules is as easy as connecting the module to a pressure source or hand pump, connecting the pressure module cable to the calibrator, and then applying pressure from the pressure source. At the touch of a button, the measured pressure is displayed digitally on the calibrator in up to 11 different engineering units quickly giving you the data you need. And, with 'no tools required' connectors you don't even need to reach for a wrench to make connections. When used with the 750 Series Documenting Process Calibrators pressure readings can even be date/time-stamped and stored in documented calibration records for later retrieval.

This saves time, eliminates errors, and supports compliance with quality standards and regulations. A complete family of pressure modulesA family of 50 pressure modules covers pressure calibrations from 0 to 1 in H20 to 10000 psi ( 2.5 mbar to 690 bar). Gage pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labeled for pressu