here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Moocci Fiber Optic Visual Fault Locator
Visual fault locator is used for the measurement in single-mode or multi-mode fibers.
650nm Visual Fault Finder for fiber tracing, fiber routing and continuity checking.
It works very well to identify flaws in fiber and even to help cut and clean the fiber to prep it for quick connects.
It is easy to carry (even put it directly in your pocket), easy to test on site, low battery warning, and remote detection.
The design with a small pouch makes it portable; the dust-proof design keeps the optical fiber connector clean.
Moocci Fiber Optic Visual Fault Locator
- Material Body: Aluminum Alloy
- Wavelength: 650 nm
- Weight: About 173 g (w/o batteries)
- Output power: 30 MW 30 KM
- Color of Switch: Green/Purple/Blue/Black/White
Replaceable Ceramic Core
Each fiber fault locator will be given an extra ceramic core. Just remove the metal head when replacing.
Warm reminder: Ceramic core is fragile, do not install and disassemble by force
Strong and Stable Source Output Power
High thermal conductivity, easily penetrate long distance optical fiber.
Do not irradiate into the eyes to avoid eye injury.
Non-slip Handle
The body of this fiber light is made of aluminum alloy. Durable, anti oxidant Corrosion resistance.
Sliding upward means "always on"
While sliding downward means"flashing"
Precautions
(1) Avoid direct to eyes when working.
(2) The higher the temperature, the shorter the life of the fiber vfl, avoid high temperature operation. (Operating temperature: 10-60°C)
(3) When the fiber light tester is working, the fiber head should be cleaned.
(4) When not using the fiber optic tester kit, please cover the dust cap to avoid falling into dust.
(5) Remove the battery when not in use.
(6) Operating temperature: 10-60°C; - Storage temperature: -40-85°C
(7) Controls: On/off, continuous/flashing
 Visual Fault Locator |  FTTH Drop Cable Stripper |  CFS-3 Fiber Optic Stripper |  Stripper |  Locator and Stripper |  Cable Finder Circuit Tester | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — no data | — no data | — | — | — no data | — |
| Type | 2PC Visual Fault Locator | FTTH Drop Cable Stripper | 3 Port Hole Fiber | FTTH Drop Cable Stripper and Fiber Optic Stripper | Visual Fault Locator and Fiber Optic Stripper | Cable Finder Circuit Tester |
Moocci Fiber Optic Visual Fault Locator
Visual fault locator is used for the measurement in single-mode or multi-mode fibers.
650nm Visual Fault Finder for fiber tracing, fiber routing and continuity checking.
It works very well to identify flaws in fiber and even to help cut and clean the fiber to prep it for quick connects.
It is easy to carry (even put it directly in your pocket), easy to test on site, low battery warning, and remote detection.
The design with a small pouch makes it portable; the dust-proof design keeps the optical fiber connector clean.
Moocci Fiber Optic Visual Fault Locator
- Material Body: Aluminum Alloy
- Wavelength: 650 nm
- Weight: About 173 g (w/o batteries)
- Output power: 30 MW 30 KM
- Color of Switch: Green/Purple/Blue/Black/White
Replaceable Ceramic Core
Each fiber fault locator will be given an extra ceramic core. Just remove the metal head when replacing.
Warm reminder: Ceramic core is fragile, do not install and disassemble by force
Strong and Stable Source Output Power
High thermal conductivity, easily penetrate long distance optical fiber.
Do not irradiate into the eyes to avoid eye injury.
Non-slip Handle
The body of this fiber light is made of aluminum alloy. Durable, anti oxidant Corrosion resistance.
Sliding upward means "always on"
While sliding downward means"flashing"
Precautions
(1) Avoid direct to eyes when working.
(2) The higher the temperature, the shorter the life of the fiber vfl, avoid high temperature operation. (Operating temperature: 10-60°C)
(3) When the fiber light tester is working, the fiber head should be cleaned.
(4) When not using the fiber optic tester kit, please cover the dust cap to avoid falling into dust.
(5) Remove the battery when not in use.
(6) Operating temperature: 10-60°C; - Storage temperature: -40-85°C
(7) Controls: On/off, continuous/flashing
Visual Fault Locator | FTTH Drop Cable Stripper | CFS-3 Fiber Optic Stripper | Stripper | Locator and Stripper | Cable Finder Circuit Tester | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — no data | — no data | — | — | — no data | — |
| Type | 2PC Visual Fault Locator | FTTH Drop Cable Stripper | 3 Port Hole Fiber | FTTH Drop Cable Stripper and Fiber Optic Stripper | Visual Fault Locator and Fiber Optic Stripper | Cable Finder Circuit Tester |
Visual Fault Locator
Fiber Optic Adapter
Moocci
Fiber Optic Tools
Fiber Optic
LC Loopback Adapter
Office Products
Drip Irrigation Kit
Fiber Optic Connector
Fiber Optic
Snap Buttons
