Sabrent M.2 2280 SSD Rocket Heatsink in Silver (SB-HTSS)

Pros: Simple to install the heatsink! Just make sure that you have enough room to install the Heatsink as it fits fine in the bottom M2 slot and want fit in the top M2 slot because of the video card but that one has enough air to keep it around 99 to 100.6 degrees, in a ASUS Prime X570-P motherboard.

Cons: No Cons!

Overall Review: It took less than 15 minutes to install the heatsink as I had to removed the Video card. My M2 drive was running 148.7 degrees before I installed the Rocket Heatsink and after it was running 100.4 degrees, a big difference and should prolong the drive. Ronald

Pros: Sabrent comes through again!! This unit functions so much better than what came with the ASUS motherboard, which was nothing more than the cover for the M2 slot with some thermal tape. It also looks very cool. Instal was "tab A into slot B".

Cons: None.

Overall Review: Buy it.

Pros: Keeps the hottest SSD COOL I ordered to cool the WD 850 which does not have its own solution available yet. 35-45C I've seen reviews at 88-90 without cooling, so I don't think you could possibly do better

Cons: none

Overall Review: Best SSD cooler on the market as far as I can tell. Significant improvement over simple slab MB cooler.

Pros: Fits the Sabrent NVME 4.0 1 tb perfectly.No problems with overheating.

Cons: I used this on the 2nd NVME location on a Gigabyte Aorus elite x570 Motherboard. The top of the heatsink rubbed against the Gigabyte 5500XT video card and the fan edges clipped the top of the heatsink. I had to use my Dremel tool to trim the top aluminum section taking care not to damage the copper heat pipes.

Overall Review: I would recommend the product, but be aware the height may conflict with your video card depending on the location on your motherboard

Pros: Solid product with clear cut instructions!

Cons: None

Overall Review: Read through all the reviews for heat sinks and quickly realized those smaller cheaper products were a bad investment. Decided to go with Sabrent since it was the only brand I was familiar with. I was extremely please when I opened the box to find perfect shadow box packaging in foam. It housed the heatsink, 4 assembly screws and even 1 NVME motherboard screw. It also had Thermal pads with detailed instructions based on your SSD. The second I picked up the heatsink I realized two things: 1. This think is solid and sturdy with a good amount of weight letting me know this is a quality product. 2. How cold the heatsink felt meaning it was a great heat absorber! Highly recommend this product!!!

Pros: keeps temperature down

Cons: size can cause it to block other components

Overall Review: If you are sure you have the space for this item, then it is a good product. In my case, it ended up blocking the installation of a second graphics card. I bought three and am using none of them.