L17 Laser Simulator Dedicated Battery/Electronic Magazine

L17 laser simulator dedicated battery/electronic magazine
PS: Only applicable to L17 laser simulator, NOT FOT Real GUN Please put the battery/magazine into the simulator gunand pull the slide first and then pull the trigger to shoot. If the slide wont move automatically and there is no red laser out, after you press the trigger, which means the battery uses up, please charge to it first. How to withdraw the magazine correctly? Please press the magazine lock firstand then it will automatically fall off. It is forbidden to forcibly pull out the magazine. How to charge to the magazine/battery? A. Please use USB adapter to or power bank to charge to the magazine. It takes 1 to 1.5 hrs to charge full, please stop charging to it after 1.5 hrs. B. There are 8 indicate lights, which will display bullets number in the first 6secs when connected to the power, then it will display the battery status. C. The indicate light will flash quickly during charging, and all the lights will turn off or on after charged full. D. The indicate lights will go off in 10secs after it is withdrawn from the simulator gun.

They will display bullets number in first 6secs, and display battery status in the following 4secs. The flashing lights number means actual battery, for example, the 4 indicator lights below will flash slowly if there is only 50% battery left. There are two possible reasons for
L17 running fire: A. It may becaused by the low powerof the magazine, please charge it in time. B. The second reason is that themagazine has not been installed properly. Please press the release button to take out the magazine and then reinstall it.
Tips: Using the L17 shooting simulator to practice shooting should strictly obey standard shooting procedures. Forbid shooting with the hands holding the magazine. Forbid stopping the recoil movement of the slide during shooting. These two wrong operations mentioned will cause damage to both the simulator and the magazine. Simulator needs regular maintenance, users are kindly suggested to lubricate the key position of the simulator with lubricating grease by pressing the trigger about 2000 times. The position includes sliding rail, main transmission gear, rack and hammer next to the floating lock. When disassembling and installing the slide for maintenance, the magazine must be released in advance. Disoperation will easily make the laser sensor misjudged and lead to damage to the gear box.