Sold by: ForthwithIndustry ForthwithIndustry
  • $7.99
  • $2.04 Shipping ()

Are you an E-Blast Insider?

Newegg

Shop without retyping payment details. Secure shopping made faster.

Check out with PayPal.

Authentic Apple MacBook Pro Rubber Feet Replacement Kit Bottom Case 13" 15" 17" RETINA A1398 A1425 A1502 (Macbook Retina 2012+)

In stock.
Ships from United States.
  • Suitable for Apple macbook pro Unibody 13" / 15" Retina (2012, 2013, 2014)
  • Package includes 10 Piece Bottom Case Screws - 1 Pentalobe Screwdriver - 4 retina feet
  • Compatible model: MacBook Pro Retina A1425 A1502 A1398 all models
  • Macbook Pro RETINA Display Bottom Case Rubber Feet Replacement Set A1425 A1502 A1398 13" 15"
  • This kind of rubber feet are fit for macbook PRO Retina mac 13 mac 15 A1425 A1502 A1398 ONLY ,not for AIR ONES( A1370 A1369 A1465 A1466 ) PRO ONES(A1278 A1286 A1297)
Choking Hazard Small parts. Not for children under 3 years.
Overview
Specs
Reviews
MacBook Pro Retina Full Kit Set - Feet with Outer + Screws + Screwdriver
Authentic Apple Macbook Pro Retina Rubber Feet Full Kit Set
DIY Foot Replacement Instructions Note: Use the foot replacement kit for missing feet only. Do not replace well-adhered feet. Removing feet for the sake of replacement can damage the bottom case.

Pentalobe 00 screwdriver
Tweezers
Paper clip or safety pin
Gloves are suggested for this procedure. Preliminary Step Before you begin, check the foot location requiring replacement and verify that the case plug, and the case foot in the kit, match the pictures below.

Place the computer upside down on a clean, lint-free cloth or other nonabrasive surface. Remove the bottom case. Using the Pentalobe 00 screwdriver, remove the bottom case by removing 10 screws. Important: Screws at sides and front must be removed and installed at an angle. Gently pull the bottom case from the side the display hinges are on and lift upwards at an angle. Make sure the foot area on the bottom case is clean and free of debris. If any portion of the foot adhesive remains, peel it up with a pair of tweezers. Clean both sides of the bottom case around the foot area. Allow the alcohol to evaporate. Peel the outer foot from its packaging and affix it firmly to the bottom case. Use the glue to adhere the outer foot to the bottom case. Avoid touching the adhesive backing. Use a paperclip or safety pin to open the glue nozzle. A paperclip or safety pin can also unplug the glue nozzle after storage. Apply a very small drop of glue on the bottom of the foot on the bottom case. Do not spread the glue. Seat the plug onto the glued area. Do not use your finger to press the foot plug down. Use the wooden end of a cotton swab to press the foot plug into place. Lightly press and hold the foot in place for 30 seconds. Clean any excess glue with a cotton dry swab. Important: Do not wipe the glue; use the cotton dry swab to absorb any excess glue. Excess puddled glue may take hours to dry and may cause the bottom case to adhere to the logic board or interior cabling. Reassembly Note: Install screws in order shown. If sequence is not followed, bottom case might wobble when placed on level surface.
Authentic Apple Macbook Pro Retina Rubber Feet Full Kit Set
Place the computer upside down on a clean, lint-free cloth or other nonabrasive surface. Remove the bottom case. Using the Pentalobe 00 screwdriver, remove the bottom case by removing 10 screws. Important: Screws at sides and front must be removed and installed at an angle.
Place the computer upside down on a clean, lint-free cloth or other nonabrasive surface. Remove the bottom case.

Using the Pentalobe 00 screwdriver, remove the bottom case by removing 10 screws. Important: Screws at sides and front must be removed and installed at an angle.
Authentic Apple Macbook Pro Retina Rubber Feet Full Kit Set Bottom Case cover
Gently pull the bottom case from the side the display hinges are on and lift upwards at an angle.

Authentic Apple Macbook Pro Retina Rubber Feet Full Kit Set Real Rubber Feet foot set
Clean area with rubbing alcohol and allow to properly dry. Peel the outer foot from its packaging and affix it firmly to the bottom case. Use the glue to adhere the outer foot to the bottom case.
Authentic Apple Macbook Pro Retina Rubber Feet Full Kit Set Screws Pentalobe
Clean any excess glue with a cotton dry swab. Important: Use the cotton dry swab to absorb any excess glue. Allow 15 minutes to properly dry before putting cover back on.
Authentic Apple Macbook Pro Retina Rubber Feet Full Kit Set
Reassembly Note: Install screws in order shown. If sequence is not followed, bottom case might wobble when placed on level surface.

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info

LOADING...
TOP