Loaded Sub Enclosure Features: Rockville Single 12 K5 1400w Car Subwoofer Pre-loaded In Vented Sub
Enclosure Peak Power Handling: 1400 Watts Program
Power Handling: 700 Watts CEA Rated
RMS Power Handling: 350
Watts Final Impedance: 4 Ohm ¾” MDF enclosure Bonded stapled and braced Computer designed vents Angled at 15 % for perfect bass alignment High quality aviation grade tweed carpet Satin Nickel speaker wire push terminals Enclosure air space is 1.52 Cu Ft per sub
Vent dimensions (inches): 2.25 x 7 x 8.5
Tuning frequency of enclosure: 35 Hz 2 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire 50 Oz High Quality Magnet Cast Iron Basket With Black Sanded Finish Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion Blue Stitching Cone Reinforcement Ensures Long Life Polypropylene Dustcap Gold-Plated spring loaded push terminals
Impedance: Single 4-Ohm Voice Coils Vented Hole on T-yoke Enhances Heat Dissipation Mounting Gasket with Rockville branding Makes it Easy To Mount the Subwoofer Air-Tight High BL Magnetic Motor Gap High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power
Cutout Diameter: 11.02 ” inches
Mounting Depth: 5.03 ” inches
Frequency Response: 25 Hz - 1.5K kHz 6mm T-Yoke + 6mm
Washer Sensitivity: 88dB
Weight: 10.1 Lbs.
Loaded enclosure weight: 41.5 Lbs.
Loaded enclosure dimensions (inches): 18.25 ” x 14.25 ” x 16.25 ”
Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.
) - 2 Ohm: 350 Watts x 1 Channel <1% THD+N - 4 Ohm: 220 Watts x 1 Channel <1% THD+N Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel - 4 Ohm: 880 Watts x 1 Channel High-Speed MOSFET Power Supply Optical Coupler Class “D” Technology Fully Adjustable 12dB / Octave Crossover with Differential Circuitry Low Pass Filter: 50Hz - 250Hz Subsonic Filter: 15Hz - 55Hz Phase Control Full IC-Controlled Protection Circuitry Fully Adjustable 12dB Bass Equalizer Mute and Delay Soft Start System Status Mode LED Indicator Minimum THD at Rated Power: <0.1% S / N Ratio: > 90dB Under Voltage Protection at 10V Over Voltage Protection at 16V
Frequency Response: 15Hz - 250
Hz Features of wire kit: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable 17 8 Gauge Translucent Blue SuperFlex Power Cables 17 18 Gauge Blue Remote Cable 17 16 Gauge Clear Speaker Wire 3 8 Gauge SuperFlex Ground Wire Gold Plated AGU Heat Resistant Fuse Holder 60 Amp AGU Gold Plated Fuse 7 Split Tube Loom
Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets Soft abrasion proof insulating jacket allows for 100% improved flexibility PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F