here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Meet Your Seller
Upgraded 256X268mm GECO Plate for Anycubic Kobra 3/Kobra 3 V2 3D Printer,PLA Cold Plate No Heating Magnetic Spring Steel 0 Printing Hot Bed No Glue Required for Anycubic Kobra V2/Kobra 3
- Compatible printer:It is suitable for Anycubic kobra 3/Kobra 3 Combo/Kobra 3 V2 3D Printer.GECO plate has a beautiful surface texture and a full sci-fi style.The print will not transfer the surface texture,which can keep the bottom ofyour print delicate and uniform with coordinated texture.; No Heat Required:Specially manufactured for PLA,no need to wait for heating up the hot bed.Just set the printing plate to 1°C,with less power,it can save you more energy and reduce printing costs.(Attention:If you printer can't set to 1°C,please updade your firmware)The GECO Plate is also the first choice for farmers to print,stable printing, energy saving and reduce spaghetti.Note:Only PLA can be printed.; Thicker and heavier:Our GECO is thicker and heavier than ordinary PEI hot beds. Thick and magnetic, it can prevent large prints from warping and small and tall prints from falling over. Flexible, detachable, double-sided design. Durable and easy to use, place the print plate on the hot bed of the Anycubic Kobra 3/Kobra 3 3d printer, and then the print bed will automatically level when it is turned on. The spring steel plate can be bent, and the model can be quickly removed without the help of other tools. And the board will flatten again.; Maintain Build Plate:After long-term repeated use, the plate needs to be repaired and cleaned(Before printing, you can clean the GECO plate by wiping it with alcohol or using soapy water to remove dust, oil, and fingerprints). Maintain the print pla
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Sahvaim 3D Printer GECO Plate Inspired by gecko adhesion, this PLA-exclusive cold plate uses Van der Waals force for instant, grip with its frosted texture. No preheating required at 20°Csave energy and costs! Thicker, magnetic design prevents warping and model collapse. Effortlessly remove prints by bending the spring steel plate (self-flattening), and enjoy double-sided use with easy alcohol/soap cleaning.
Ideal for beginners: 100% adhesion, no glue/spray, and anti-warp stability.
*Note: PLA only. For temps <20°C, adjust to 20-40°C. *
Ideal for beginners: 100% adhesion, no glue/spray, and anti-warp stability.
*Note: PLA only. For temps <20°C, adjust to 20-40°C. *
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Cookvio Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...