Dash Cam Hardwire Kit OBD2 Type C USB C with OBD Power Cable | 12-24V to 5V/3A, Low Voltage Protection, 24h Parking Surveillance/ACC Mode, For Dashcam, GPS, Radar

[24h Parking /
ACC Mode Switch]: MODE - will activate your dashcam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; MODE O will activate ACC mode which only supplies power when engine is on
[Universal Dash Cam OBD Hardwire Kit]: This OBD dash cam hard wire power charging cable kit is a universal model for most car dash cameras, GPS, radar, and dash cams on the market (Please note that this unit DOES NOT work with EV Car/Electric Vehicle)
[Simple Plug-in Installation]: This OBD dash cam hardwire cable is easy to install by plugging it into your car' s OBD connector and making sure it can power on your dashcam, then hide the extra wire; unlike other complex hardwire kits, you need to deal with fusebox and battery electricity
[Low Voltage Protection]: It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it from draining the battery
[Clean and Space Saving]: By using this dash cam OBD hardwire kit you can easily hide the wire and cable to make your carpet looks cableless and clean; also this dash cam charger doesn' t occupy your car' s cigarette lighter port and allows you to use the port to charge other devices in your car
[ACC Mode Power Off Feature]: The ACC Mode O, the OBD hardwire kit will power off in 20 minutes after the car engine is off (Time delay setup to provide power for car start/stop function)
[USB Type-C Compatibility]: The USB Type-C connector uses A5-B5 signal pins and may not be compatible with some dash cam brands that use A8-B8 signal pins
[Vehicle Compatibility]: The OBD 2 connector is compatible with most gas and hybrid vehicles; it does not work with electric and plug-in hybrid vehicles