USB C Switch,Bi-Directional USB C Switcher 2 Laptops,USB Type C KVM Switch 4K@120Hz Video/10Gbps Data Transfer/100W Charging,Compatible with Thunderbolt Device,2.62FT USB-C Cables Included

Bidirectional USB C SwitchThis USB-C switch allows 2 latops that with USB C port share 1 monitor or 1 laptop share 2 monitors.
NOTE: Two monitors CANNOT display simultaneously (Only supports switching to select one of the monitors to display). Need to use standard USB-C USB 3.1 version Gen-2 Cables to connect this switch. 2 USB 3.1 version Gen-2 Cables included, the length of the cables are 0.8 m/ 2.62 ft, if the setting length is not allowed, please purchase carefully
Ultra HD 4K@120HzThis USB C Switch/Splitter can output max 4K@120Hz 1080P@165Hz to USB-C or HDMI Displays. Support ultra-wide screen output (3440*1440, 2560x1440 etc. ). The Maximum resolution and refresh rate of your output depends on the input source device, monitor, and connection cables.
Maximum Up 10Gbps Transfer RateUSB Type C switch supports a maximum transfer speed of 10Gbps (USB 3.1 Gen2) to transfer TV show, movies in seconds.
Note: The length of the USB C cable fixed in the switch is only 40cm/ 1.31 ft, because the shortened cable length can improve stability
Rapid Reverse ChargingUSB C switch can charge the laptops and other devices while working that up to 100W.
Note: The monitor, data cable and device should support fast charging, and the monitor needs to support reverse charging. HDMI cable do not support charging.
2 Switching Methdos&LED IndicatorUSB Type C switch driver-free, plug and play, pressing the button on the panel or use the wired remote controllerincluded in the package to switch the computers. LED indicate the active computer.
Improved Stability - UpgradedThe length of the USB C cable fixed in the switcher is 40CM/ 1.31FT, and the length of the USB C cables included in the package are 80CM/ 2.62FT. Compared with the old version, the stability and compatibility of the upgraded version are better.
IMPORTANT NOTEConnecting a USB-C/Thunderbolt docking station/hub is not recommended, otherwise there will be flickering or the screen will go black. Both displays cannot be displayed at the same time. Need to use a standard USB-C USB version 3.1 Gen-2 cable to connect this switch and use the usb cable to power the switch.