New Original AntMiner APW3++ PSU 1600W Power Supply for Antminer D3 S9 / L3 In Stock 100V-240V Mining

Original AntMiner APW3++ PSU 1600W Power Supply for Antminer D3 S9 / L3 In Stock 100V-240V Mining
Packageincludes: 1 x APW3++ power supply for
AntminerS9L3Features:
1. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
2. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
Specifications: Output 1.
DCVoltage: 12.15V 2.
RatedCurrent(220V input): 133A 3.
RatedCurrent(110V input): 100A 4.
RatedPower(220V input): 1600W 5.
RatedPower(110V input): 1200W 4.
Ripple&Noise: less than 1% 5.
VoltageRegulation: less than 2% 6.
SourceRegulation: less than 1% 7.
LoadRegulation: less than 1% 8.
Setup,
RiseTime: less than 2S 9. Power off
ProtectionTripTime: more than 9mS 10.
InterfaceType: 5 pairs of 6 pin PCI-E connectors (i. e. 10 connectors) 11.
NoiseLevel: less than 43DB
Input: 1.
VoltageRange: 100-240V AC 2.
StartingVoltage: 95-105V AC 3.
FrequencyRange: 47-63Hz 4.
PowerFactor: more than 0.95 (full load) 5.
LeakageCurrent: less than 1.5 mA (220V 50Hz) Protection 1.
Low-voltageInput: 80-89V AC 2.
OutputShortCircuit: Yes 3.
OutputOvercurrent: 134-185A max. 4.
OverheatProtection: Yes Environment Conditions 1.
OperatingTemperature: -20 Celsius - 50 Celsius 2.
OperatingHumidity: 20% - 90% relative humidity (non-condensing)
StructureDimensions: 220mm*108mm*62mm
CoolingFan: Forced-air cooling
Note: The power cord is not included, please find one with at least 10A from your local market.