Meet Your Seller
Jump Start EPS/ATX 24 Pin Power Supply Jumper On/Off Switch - Red Light PSU Cable (CAB285)
- Do you need to turn on an ATX power supply without a motherboard
- Tired of using paperclips, or other rigged methods of turning the system on
- Then our ATX Power Supply Reset Switch is the answer.
- Do you need to turn on an ATX power supply without a motherboard?
- Tired of using paperclips, or other rigged methods of turning the system on?
Any questions? Ask CelesteSM will help you find out quickly.
Do you need to turn on an ATX power supply without a motherboard? This jump start switch replaces the paperclip and other rigged methods. It has a 24-pin female Molex connector that plugs onto the main cable of the power supply and spoofs the motherboard connection, and a round red rocker switch on a cable that turns the power supply on and off. The switch has a built-in red light.
Properties
- Type: Power supply jump start switch
- Connector: 24-pin female Molex (EPS/ATX)
- Switch: Round red rocker switch, marked I/O
- Light: Red light
- Pieces in the pack: 1
Start a power supply without a motherboard
Plug the 24-pin connector onto the main cable of the power supply, flip the switch to I and the power supply starts. Flip it back to O to turn it off. This is the clean way to run a power supply on its own, without bridging pins by hand.
Made for water cooling and testing
The switch is handy for leak testing a new water cooling loop: power only the pump (and fans) from the power supply while the rest of the PC stays off, so a leak cannot reach powered parts. It also helps when you test a power supply, run a pump to fill and bleed a loop, or power fans and lighting on a bench.
Rocker switch on a cable
The round rocker switch sits at the end of a three-wire black cable, so you can keep it outside the case or on the bench while the 24-pin connector stays on the power supply cable. This version is the one with a red light.
Technical data
- Part number: JS24-RL
- Type: EPS/ATX jump start switch
- Connector: 24-pin female Molex
- Switch: Rocker switch, round, red, marked I/O
- Light: Red light
- Cable: Three wires, black
Notes
- Switch the power supply off at its rear switch before you connect or remove the jump start switch.
- The jump start switch comes with a red light (MOD-0045) or without a light (MOD-0271). This listing is the version with a red light.
In the box
- 1x Jump Start EPS/ATX 24 Pin Power Supply Jumper On/Off Switch - Red Light
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory







