Are you an E-Blast Insider?
Shop without retyping payment details. Secure shopping made faster.
Check out with PayPal.
Tenergy TB6AC+80W 8A Intelligent Digital Balance Charger for NiMH, NiCd, Li-PO, Li-Fe, SLA
- Support: Tamiya, Mini Tamiya, JST, hi-tec, EC3, Deans
- High-power and high-performance circuit
- Individual voltage balancer for Lithium batteries inside
- Balance individual cells on discharge
Supports the following connector types:
- Mini Tamiya
- Operating Voltage: DC 11~18 volts, AC 100 ~ 240V(50/60Hz)
- Charge Power: max. 80 Watts [DC input]/ 50 Watts [AC Input]
- Discharge Power: 5W
- NiCd/MH: 1~15 cells
- LiIo/LiPo/LiFe: 1~6 series
- Pb Battery Voltage: 2~20V
- Charge Current: 0.1 to 8.0A
- Discharge Current: 0.1 to 1A
- No. of Cycle: 1 to 5 times
- Battery Data Memory: up to 5 data
- Weight: 590g (Net Weight)
- Dimension: 135 x 145 x 43mm
Built in AC adapter
No additional power supply needed!
High-power and high-performance circuit
The smart charger employs a circuit that has maximum output power of 80W. As a result, the smart charger can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 8.0A.
Individual voltage balancer for Lithium batteries inside
Built into the smart charger is an individual-cell-voltage balancer. No external balancer is needed when charging
Lithium batteries (Li-Ion/LiPo/LiFe) for balance charging.
Balance individual cells on discharge
The smart charger also can monitor and balance individual cells of the Lithium battery pack during the discharge process, as well as the charge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Accept various types of Lithium battery
The smart charger can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry, such as minimum, maximum, and charge termination voltages.
Lithium battery Fast and Storage mode
The smart charger offers additional Lithium programming. Fast charge reduces the charging time of the Lithium battery and the Storage mode controls the final voltage of the battery to be suit for long time storage.
5 data of different batteries programs can be stored and retrieved. These data files can be recetrived at any time you need them without reprogramming.
The smart charger can perform 1 to 5 cycles of charge>discharge or discharge>charge for battery break in/refreshing and balancing.
Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
Advanced temperature sensor cable port (sensor cable not included)
An optional temperature probe contacting the surface of the battery to monitor the battery temperature during charging can be used.
----------------------- IMPORTANT CHARGING WARNING
- BEFORE CHARGING ALWAYS INSPECT BATTERIES for any type of
damages to both the wire(s) and battery pack (punctures, pvc damage, and/or
battery swelling). DO NOT Charge if the pack has any of the mentioned issues!
- ALWAYS BALANCE-CHARGE RC/Hobby/Airsoft LIPO BATTERY PACKS:
when charging any of these LiPO packs, ALWAYS use the balance charge mode and use
the balance connector/board.
** Ignoring these WARNINGS could result in fire or personal/property
NOTE: Only supports Li-Ion & LiPO Hobby battery packs that has a balance connector. DO NOT charge any battery packs without a balance plug!