More light effects:Dual aperture design with 12 internal + 12 external independently controlled light beads, using a wireless controller and motherboard to easily change 30 combinations of light effects.
Innovative Applications: New triangular hubs are used to disperse the connection of power cables and adapt to the assembly needs of each angle of your pc.
Easy Management: direct connection using power SATA of your pc, no need to add additional connection cables, easy cable management.
Super Airflow: Using the principles of air flow, the angular design of the fan blades provides efficient ventilation with a max airflow of 32.97CFM.
Long Service Life : (30000h),Sealed hydraulic bearings to increase the operating stability of the pc fan while preventing dust and lubricant leakage.
Overview
Specs
Reviews
AsiaHorse Fish-Bone Double ARGB Case Fan-Clear Blue
Parameter Information
New triangular hubs are used to disperse the connection of power cables.
It can be applied to various CPU coolers, e.g. water cooling, tower hubs, etc..
Package:
3 x Fans, 12 x screws, 1x Hub, 1 x manual, 1 x Remote , 1 x PWM cable, 1x Velcro
Cons: Needs the 3-pin 5V motherboard header for the RGBs to work.
Overall Review: As I said, it was easy to install, and it's quiet, but you absolutely need the right 5V connector for the fan's LED aspect, I don't, so I can't use the LED aspect of it. I have 2 LED strip headers on my motherboard, but they require 4 pins, this fan has one pin blocked, so it's not compatible, so make sure you have the right header before you buy it.
Catastrophic failure after just 15hrs of use!! (See photo)2/27/2022 9:33:17 PM
Pros: Cheap, easy to set up.
Cons: Doesnt function as advertised, Poor quality materials, fell apart after 5 days.
Overall Review: I chose these fans to try and cut a bit of the cost out of my PC upgrade plans. In hindsight I should have just spent a little more and just got good quality fans as one of these has already died. Heres my experience:
Installation of the fans was straight forward although the plastic that the outer housing is made out of felt very fragile and flimsy, the self tapping screws could have easily cracked it upon installation if I wasnt careful. The fan hub feels similarly chintzy and the proprietary fan connectors felt like they wouldnt last more than 6-7 reinstalls before something broke. The hub also failed to work in PWM mode for me despite being properly connected to a motherboard fan header (I bought two 3X packs w/ hubs and neither hub combination worked in PWM mode).
Eventually I configured them in a way that was livable for me and setting up the argb was fairly straight forward (I used Mystic Light). The RGB quality was okay; bright enough and fully synchronized although it could have done with better diffusion. The fans are slow and dont move much air and after just few hours of use I was able to hear bearing noises.
Despite all this I was still enjoying the fans and temperatures were plenty cool for gaming. However the deal breaker came when one of the fans came disconnected from the housing and dropped out of its place, left to hang from the wire (see photo). Thankfully I was sitting right next to my PC and no harm was done. This catastrophic failure occurred after just 5 days of use, each day of which I only had about 3 hours of gaming. I suspect the cause is in the poor insulation around the RGB lights. Upon inspection I found that the back of the fan where the light ring is was almost too hot to touch, causing the cheap glue that holds the fan in to melt. Ive requested a refund and ordered some better quality fans as I should have done to begin with. Dont waste your money on these fans, you get what you pay for.
Pros: Easy to install, quiet, and sturdy.
Cons: Needs the 3-pin 5V motherboard header for the RGBs to work.
Overall Review: As I said, it was easy to install, and it's quiet, but you absolutely need the right 5V connector for the fan's LED aspect, I don't, so I can't use the LED aspect of it. I have 2 LED strip headers on my motherboard, but they require 4 pins, this fan has one pin blocked, so it's not compatible, so make sure you have the right header before you buy it.