Creality Official Chamber Heater, Support 40-70 Heating, Filament Drying, Modular Design Allows DIY Personalized Drying Box, 3D Printer Chamber Heater Suitable for Enclosed FDM 3D Printers

Modular Chamber Heater: Creality chamber heater has a modular design, which can be freely made into a personal drying box or increase the internal temperature of your printers. This chamber heater is suitable for enclosed FDM printers as well as open printers with enclosures, such
as: K1, K1C, K1 Max, K1 SE, Ender 5 Max, etc. It can also be used with the Creality multi-function protective cover. 70
High-temperature Hot Air Circulation: Equipped with a 400W PTC heater, this 3D printer chamber heater heats up quickly to 70 to dry filament. Built-in dual axial fans allow hot air to circulate in a confined space.
Note: The heating module has a relatively high power output. Please do not use it in excessively confined spaces. Heating space requires a height of30cm and a length of25cm.
Independent Temperature Controller: You can freely adjust the temperature between 45 and 70. The heating duration can be freely set from 1-48 hours. Power-off memory restores previous settings automatically.
Active Chamber Heating: Designed to meet the printing requirements of common filaments such as ABS, PA, and PC, minimizes warping, shrinkage, and weak layer adhesion while boosting strength and surface finish.
Filament Drying: Continuous drying of filaments during the printing process prevents moisture-induced problems such as drawing, clogging, and layer shifting, and minimizes the impact of external environmental factors on 3D filament printing.
Dual Safety Protection: The