Shielded DP to DP Male to Male Extension Adapter Cable Displayport-compatible DP1.4 Flat for Graphics Card GPU Video Laptop TV(P7A-P7B)(15cm)

Standard DP to DP Male to Male Extension Adapter Cable Displayport-compatible DP 1.4 Flat Thin for Graphics Card Connection Cable
Note: The extension cable does not support two or more DP cables connected in series. If you connect more than two DP cables in series, the signal will be attenuated. It may not be used normally.
Brand: ADT-Link
Product Model: DPP series goods
Product name: Standard DP extension adapter cable (large DP interface to large DP interface)
Cable length: 15cm, 25cm (support line length customization, if you need another length, please contact us to change the price, thank you! )
Product specifications: support DP 1.4 version, support HDR/DSC signal transmission
Refresh rate: 1080P-240Hz, 2K-144/165Hz, 4K-144Hz
Audio transmission: 32-bit / 1536kHz
Operating temperature: -20 ~ 80
Wire length description.
Wire length refers to the part of the wire, not including PCB and connectors.
Note: The extension cable does not support two transfers, which means that the signal will be attenuated by stringing more than 2 PCs DP cables together. No relay chip can not support DP 1.4 at full speed, you need to slow down the frequency reduction to use it properly.
ADT DPP series Part-Number Description:
Note 1: DP8B and DP8T have no E-mark/chip. After two DP lines are connected in series, the signal attenuation may not meet the DP 1.4 full speed. DP8Q with E-mark/chip, active chip technology can enhance the signal, support DP 1.4 full speed
Note 2: The extension cord does not support 2 transfers, that is, the signal will be attenuated if two or more DP lines are connected in series. The non-relay chip cannot support DP 1.4 full speed, and it needs to be reduced in speed and frequency to be used normally.
Summary of technical issues.
What is the quality of the cable? Is there shielding?
There is metal layer shielding with advanced EMI shielding conductive polymer, new material for EMI shielding, and flat cable design. This technology allows each cable to be completely covered by a conductive polymer EMI shield to prevent incoming or outgoing EMI frequency emissions, to miniaturize interference and performance degradation, and to reduce the weight of the lineup.
Wire thickness?
The black wire is 1.3 mm thick, the silver wire is 1.4 mm thick, and the blue wire is 0.94 mm thick.