Shop Confidently with 30-Day Hassle-Free Returns
Sold by: Direct from manufacturerTREADALT-TEC TREADALT-TEC
211 Ratings (77% Positive)
  • $8.99
  • $3.94 Shipping ()
Add To ListFound on 1 wish list

Meet Your Sellers

Are you an E-Blast Insider?

8dBi RP-SMA Dual Band 2.4GHz 5GHz 5.8G + 2 x M.2 IPEX 4 MHF4 Cable Antenna for NGFF Wireless Cards M.2 3G 4G Cards for Intel AX201 AX200 9260 9560 8260 8265 7260 NGFF Wireless Card Routers PC FPV etc

In stock.
Ships from United States.
  • Only use for NGFF interface, do not use for MINI PCI-E interface.
  • 2 x 8dBi RPSMA Antennas and 2 x M.2(NGFF) cables
  • Not Includes the NGFF card show on Picture!!
  • compact for: Jetson Nano WiFi board NVIDIA Jetson M.2 Network Adapter MSI MPG X570 GAMING EDGE with m.2 slot with wifi Bluetooth network card ASROCK X570 motherboard WiFi Bluetooth board with m.2 slot with wifi Bluetooth network card ASRock Z370 extreme 4 with m.2 slot with wifi Bluetooth network card Crosshair VI formula board with m.2 slot with wifi Bluetooth network card gigabyte z270n-wifi motherboard Gigabyte GA-X99-UD4 etc
  • Upgraded your Routers / Repeater / Range Extender to make the signal be better and longer range, improve range and coverage of wireless signal. 2.Upgraded your Desktop PC / Mini ITX Build / PCI Card to make your desktop great increased work performance. 3.Upgraded the TX and RX of a FPV UAV Drone for longer range. 4.8dBi high-gain dual-band aerial for indoor use. 5.Suitable for all DrayTek Routers and Ac
Overview
Specs
Reviews
Omnidirectional Aantenna Specifications:
V.S.W.R = 2
Max Power 50w
Connector RP-SMA male
Height 15.5 CM
Gain(dBi) 8dBi 0.7dbi
Applications WiFi / WiMAX / LTE
Frequency & Gain
5dBi ± 0.5dBi @ 2400~2500MHz
8dBi ± 0.5dBi @ 5100~5800MHz
Efficiency: 2400-2500 MHz 900-5900 MHz
Compliant with 802.11ax, 802.11ac, 802.11n, 802.11b & 802.11g
Compatible with intel NGFF M.2 desktop kit for example intel ax200 ax201 8265 ect Bluetooth devices wifi desktop card, Wireless Access Points & other wireless devices
As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth).
Compatible with 802.11a,b,g,n and 802.11ac 802.11ax and other Dual Band 2.4GHz / 5.8 GHz applications.

Antenna Cable Specifications:
MHF4 To RP-SMA female (bulkhead)
Length: 8 inches
Applicable cable: 0.81mm RF coaxial cable
Frequency Range: DC up to 6GHz (VSWR: 1.3 max. at 0.1~3GHz; VSWR: 1.4 max. at 3~6GHz)
High productivity: Easy cable termination by “i-Fit” without soldering
Application Technology: IEEE802.11 ax/ax/a/b/g/n, WiMax, Zigbee, Bluetooth Wireless
One end has an MHF4 connector, and the other end has an RP-SMA female connector with a bulkhead-mount.

RP-SMA Female connector includes a bulkhead nut and washer:
You can use this to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection), case or Printed Circuit Board (PCB).
Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector.
The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches.

RP-SMA Female connector composition:
Center Contact: Beryllium Copper, Gold Plated
Connector Body: Brass, Gold Plated
Crimp Ferrule: Copper, Nickel Plated
Insulators: PTFE
RP-SMA is a round score

The cable is 1.13mm mini-coaxial cable (50-ohm antennas and cables.): This is a very thin and flexible cable, with a black jacket. When connecting the U.FL connector to a jack on a miniPCI card or board, often the tight space requires the use of 1.13mm cable, because it is very thin and flexible (diameter is 1.13mm). This very thin cable is typically needed in tight spaces inside of enclosures so that the U.FL connector will snap down on the jack without popping off.
Our MHF4 to RP-SMA series coaxial cables have medium-sized, threaded coupling connectors designed for use from DC to 11 GHz. MHF4 miniature RF coaxial connector is the smallest mini RF connector in the world. Only 1.2mm low profile, MHF4 IPEX/IPX connector provides good working performance in various applications of Wireless LAN.
With their small size and high operational frequency ranges MHF4 connectors can be used for a variety of Bluetooth and wireless LAN applications in gaming equipment, test points, mobile phones, access points, GPS, notebook computers, and wireless communication devices

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info

LOADING...