HDMI Extender Splitter 1 in 2 Out Over Cat5e or 6 Ethernet Adapter Up to 165FT HD1080P60Hz with Loop Support EDID Copy Settings HDCP

[CAT6-based HDMI Extender Splitter] HDMI Extender Splitter can split one HDMI signal into two identical signals and run up to 165 feet through a CAT6 cable with two loops out to the local display

Opening CAT6HDMI Extender 1 Input 2 Output adopts the POC technology, we only need to use the power supply at the TX, and the Rx can be through the network cable Transmit power to work. As low as 5V voltage transmission, safe and reliable. (Note: 12V power supply must be connected to TX, otherwise it will damage the device.

[HDMI Extender Splitter Supports EDID Preset] According to different application requirements, TX supports a variety of EDID preset programs to improve the compatibility of the device, which can better match the signal source and display, and get the most suitable video and audio signals

[Uncompressed Transmission] HDMI Extender Splitter 1x2 supports up to 1920x1200@60Hz and 1080p@60Hz resolution. Support audio format: PCM/DTS/DSD. Recommended length: Cat6/7 - 165 ft, Cat5e - 130 ft, Cat5 - 100 ft

[HDMI Extender Splitter with Auto Equalizer Function] Plug and play setup, no need to install any software. The chip has a built-in automatic algorithm that eliminates the need to manually adjust the receiver equalization settings to be compatible with cable transmission distance. The unit only needs a power adapter to work!