Features: real-time measurement data can be stored on an SD memory card recording, the data can be downloaded to Excel chart analysis done, SD memory card can support 1GB ~ 16GB memory card capacity.
( Optional ) AC voltage: 0.1V ~ 600.0V....,.......
AC Current: 0.2A ~ 1200A (CP-1201).
Power Factor: 0.01 to 1.00.............,......
phase angle: -180 ° ~ 180 °.
AC Watt: 1W ~ 9.999MW...,.......
Frequency: 45Hz ~ 64Hz.
apparent power: 0.1KVA ~ 9.999MVA, virtual
~ 9.999MVAR watt hours: 0.1KVAH ~ 9.999MVAH. applies to three-phase three-wire, three-phase four-wire, single-phase two-wire, single-phase three-wire. attached computer connection interface ( application software + RS232 / USB Cable, depending on the need to buy )
MODEL: DW-6092 ( CP-1201 fixed using current sensing clip, can not replace other types of current sensing clip )
MODEL: DW-6093 ( can be any replacement CP-200/CP-1201/CP-2000/CP-3000, four types of current sensing clamp used)
Specifications: 3 -phase power analyzer (LUTRON DW-6093) Analysis of three -phase multi- power system, 1P / 2W, 1P / 3W, 3P, 3P / 3W / 4W * True RMS voltage and current. * Useful work power (KW MW GW) measurements. Apparent power (KVA MVA GVA) measurements. * Reactive power measurement (KVAR MVAR, GVAR). * Watt hours (WH SH QH PFH). * Power Factor (PF) phase angle (|?? ).
* Voltage measurement range:? 10 600 ACV * Current probe input signal volage (ACV): 200 mV / 300 mV / 500 mV / 1 V / 2 V / 3 V * Current probe input current range (ACA): 20 A / 200 A / 2000 A (1200 A) / 30 A / 300A / 3000 A. * Programmable CT ratio ( 1? 600 ) and PT ratio ( 1-1000 ). * ACV input impedance is 10 megohms.
* Safety standards: IEC 1010 CAT III 600V * Built-in clock and calendar, SD memory card real-time data recording, the sampling time is set to 2-7200 seconds. Just SD card into your computer, you can download all the measurements and the time information ( year / month / day / hour / minute / second ) directly into Excel, and then the user can further data analysis.
* Power: 8 1.5V alkaline batteries (not included) or DC 9V adapter Computer data output, optional usb cable (USB-01) / or USB to RS232 cable / (UPCB-02), optional data acquisition software SW-811, SW-E802
Clamp Dimensions: 210 x 64 x 33( 8.3 X 2.5 X 1.3 inches)
Jaws: 86 mm ( 3.4 inches ) - outside Fitting * Instructions............... 1 PC * Includes test leads (TL88-4AT)............ 1 set ( 4 ) * Alligator clips (TL88-4AC) 1 set ( 4 ) * Standard Clamp probe (CP-1201)........ 3 * AC to DC 9V adapter.............. 1 * SD card (2 G).................... 1 * Carrying Case......................... 1 PC * Optional 2000A current probes, CP-2000 * Optional 200A current probe, CP-200 * Optional flexible 3000A current probes, CP-3000 * Optional USB cable, USB-01 * Optional RS232 cable, UPCB-02 * Optional data acquisition software, SW-U811