- design, complete function, no castration, support subsequent upgrade.
- The radio frequency and audio parts have extremely strong anti-interference ability.
- PCB four-layer board design.
- Type C interface, linear LDO lithium battery management.
- Limited to avoid the noise brought by the switching power supply, full frequency small speakers.
- DSP SDR Receiver for Malahit
- Capacitive touch screen
- Flash via USB cable
- Default frequency range: 50KHz-200MHz
- Demodulation mode: AM, SSB, NFM, WFM
Frequency range: 50KHz to 200MHz
2. with 3.5 inch Touch LCD
Power: USB (Type C) power, or install battery, ( battery not included)
4. The radio is built on the principle of SDR - the function is determined by the loaded software;
All types of analog modulation: AM, SSB, NFM, WFM
Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, noise blanker, AGC, equalizer;
7. use cheap but fully functional chip msi001;
8. The powerful stm32h743 with clock frequency of 480mhz is applied;
9. Control - 2 encoders with buttons and touch screen;
10. Consumption - 300mA when listening to headphones;
11. In order to improve HF reception on the telescope antenna, an additional board with a source follower is developed. The board will be built into the standard receiver design.
12. Connecting to the computer via USB, you can transfer cat, IQ and audio.
13. 160 kHz span, expandable;
14. Sensitivity - 0.3 mu; v = 10dB at S / w up to 250MHz; no measurement was carried out due to lack of measuring equipment;
15. dynamic blocking range is about 85dB due to the characteristics of msi001 chip used.
16. housing made by PCB;
17. backlight control;
18. SMA antenna socket;
Size: 60x50x40mm / 2.36 x 1.96 x 1.57 inch
1x 50K-200MHz Malachite SDR Radio Malahit DSP SDR HAM Receiver
Please allow 1-3mm measuring deviation due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!