Your Browsing History
Meet Your Seller
CARROFIX Replacement CD-TP-QD-14 Dynamics Quick Disconnect Wiring Harness for 2014-2023 Harley Davidson Touring NTP-CB01
Limited time offer, ends 08/30 By PixelCore
- Custom dynamics quick connect or disconnect Y harness for Harley tour-pak 2014-2023; Plugs into rear fender harness and add power to your motorcycle with quick disconnect convenience; Quick disconnect harness provides convenient plug and play connection, no splicing or cutting required; Extends brake/stop/turn harness under seat to leave a connection accessible to remove/attach harness for tour pack, 34" long wire harness; IMPORTANT REMINDER! This harness is for OEM or add-on LED King Tour-Pak. Your tour pak must have the wiring harness in it already or else it won't have anything to plug into after the bike
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Custom Dynamics Quick Disconnect Y Harness For Harley Davidson Touring -
Part Number: CD-TP-QD-14 This wiring harness is perfect for a bike with a newer Tour Pak. With this OEM harness you won't need to hardwire it to your bike giving you the option for removal when desired. You can easily remove it to clean, dismount when desired or serviced with ease.
Fitment List: Electra Glide Ultra Classic - FLHTCU----------------2014-2019 Electra Glide Ultra Classic Low - FLHTCUL---------2015-2016 Electra Glide Ultra Limited - FLHTK----------------2014-2023 Electra Glide Ultra Limited CVO/SE - FLHTKSE---2014-2021 Electra Glide Ultra Limited Low - FLHTKL---------2015-2019 Road Glide - FLTRX----------------------------------2015-2023 Road Glide CVO/SE - FLTRXSE---------------------2018-2019 Road Glide Limited - FLTRK-------------------------2020-2023 Road Glide Limited CVO/SE - FLTRKSE------------2022-2023 Road Glide Special - FLTRXS------------------------2015-2023 Road Glide ST - FLTRXST----------------------------2022-2023 Road Glide Ultra - FLTRU---------------------------2016-2019 Road Glide Ultra CVO/SE - FLTRUSE--------------2015-2016 Road King - FLHR-----------------------------------2014-2017 Road King Special - FLHRXS-----------------------2017 Street Glide - FLHX---------------------------------2014-2023 Street Glide CVO/SE - FLHXSE---------------------2015-2022 Street Glide Special - FLHXS-----------------------2014-2023 Street Glide ST - FLHXST--------------------------2022-2023 Pre-wired OEM connector makes it easier to install. No splicing or cutting required. PVC jacket cable for resistant and long lasting uses snap design between the interface, placed loose, fall off, more secure and reliable ATTENTION AGAIN Please read all Information below before
Installation:
Important: Your motorcycle should be secured on a level surface before installation.
Warning: Disconnect negative battery cable from battery before installation. Failure do to so may result in electrical shock, injury, or fire. Secure negative battery cable away from positive side of battery and all other positive voltage sources on motor.
Part Number: CD-TP-QD-14 This wiring harness is perfect for a bike with a newer Tour Pak. With this OEM harness you won't need to hardwire it to your bike giving you the option for removal when desired. You can easily remove it to clean, dismount when desired or serviced with ease.
Fitment List: Electra Glide Ultra Classic - FLHTCU----------------2014-2019 Electra Glide Ultra Classic Low - FLHTCUL---------2015-2016 Electra Glide Ultra Limited - FLHTK----------------2014-2023 Electra Glide Ultra Limited CVO/SE - FLHTKSE---2014-2021 Electra Glide Ultra Limited Low - FLHTKL---------2015-2019 Road Glide - FLTRX----------------------------------2015-2023 Road Glide CVO/SE - FLTRXSE---------------------2018-2019 Road Glide Limited - FLTRK-------------------------2020-2023 Road Glide Limited CVO/SE - FLTRKSE------------2022-2023 Road Glide Special - FLTRXS------------------------2015-2023 Road Glide ST - FLTRXST----------------------------2022-2023 Road Glide Ultra - FLTRU---------------------------2016-2019 Road Glide Ultra CVO/SE - FLTRUSE--------------2015-2016 Road King - FLHR-----------------------------------2014-2017 Road King Special - FLHRXS-----------------------2017 Street Glide - FLHX---------------------------------2014-2023 Street Glide CVO/SE - FLHXSE---------------------2015-2022 Street Glide Special - FLHXS-----------------------2014-2023 Street Glide ST - FLHXST--------------------------2022-2023 Pre-wired OEM connector makes it easier to install. No splicing or cutting required. PVC jacket cable for resistant and long lasting uses snap design between the interface, placed loose, fall off, more secure and reliable ATTENTION AGAIN Please read all Information below before
Installation:
Important: Your motorcycle should be secured on a level surface before installation.
Warning: Disconnect negative battery cable from battery before installation. Failure do to so may result in electrical shock, injury, or fire. Secure negative battery cable away from positive side of battery and all other positive voltage sources on motor.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by PixelCore Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...