PoE Texas GPOE-16A-48v120w | Passive 802.3af Power Over Ethernet Injector for 16 PoE Cameras, IP Phones, WiFi Access Points and More | Includes 48 Volt Power Supply

Product Features:
Instantly add gigabit PoE to any network switch or router with the option to mix 10/100 and gigabit data rate devices on the same injector
Use to power up to 16 802.3 af devices with total shared power requirements of 120 watts or less
2nd power supply input for redundancy or higher total power
Powers devices labeled "12v, PoE" like Hikvision
Extend power up to 328 ft or 100 meters
Passive power is on all the time
Compatible with our WT-AF-5v10w or WT-GAF-12v12w splitters for powering non-PoE devices
Proven reliability since 2012
Included in the kit:
1x 16 Port Midspan PoE Injector
1x 48-Volt 120-Watt UL/CE/FCC Certified Power Supply
Product

Specifications

:
Certifications: UL/CE/FCC (Power Supply)
Data Ports: 16
Data + PoE Ports: 16
Data Rate: Gigabit
Power Input: 2.1 mm DC x 2
Input Voltage: 48-Volts DC
Power Supply: 48-Volts DC, 120-Watts
Max Amps Per Port: 650mA
Max Power Per Port: 30 Watts
PoE Method: Passive
Output Voltage: 48 Volts
PoE Mode/Pinout: Mode A (-1, 2 +3, 4)
PoE Standard: IEEE 802.3 af
Dimensions: 19x2x2 Inches
Operating Humidity: 5% to 90%
Operating Temperature Range: -10 - 60C
Description:
This device provides power and data on the same Ethernet cable using pins 1, 2 and 3, 6 ( 802.3 af - Mode A). All devices receive the same voltage (48v) for a combined total of 120 watts. To calculate estimated power budget, check individual device specs for power needs.
** To extend power to USB, 5v and 12v, non-poe devices - please see our active splitters
Other products from WiFi-Texas
WS-GPOE-12-48v120w - 12- port rackmount option
WS-POE-16-48v120w - 10/100 version
WS-GPOES-8-7-48v60w - integrated switch with single uplink port for data
WS-POE-Tester to display power used by a device
WT-AF-5v10w / 5-volt and WT-GAF-12v12w / 12-volt splitters