Lighting 840600 60 watt Dimmable Driver for LED Lighting, with Removable AC Cord, White

Class 2 power supply features overload protection, automatic shut-off
No minimum power load; dimming works equally well whether powering a single 3-watt LED puck light or 60 watts of tape lighting, or a combination of both
Armacost lighting 60-watt dimmable LED driver provides outstanding LED dimming performance and architectural-quality brightness control. Although virtually all dimmers will work with this dimmable LED driver, Armacost Lighting recommends Lutron CFL and Leviton illumatech universal dimmers because of their low end dimming range adjustment. Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance. When a dimmer is set to full brightness, LED driver deliver full brightness there is no loss of top-end light output. Direct wire. Driver has full safety shut off protection in case of lighting overload, open circuit, short circuit, over-temperature, or other fault, automatic restart after the fault has been corrected this is a listed class 2 power unit for safety and has class II AC inputs, fully isolated case, no ground wire is required.

Indoor/outdoor, etc. Listed for use in dry and damp locations. To work properly, your LED lighting must operate on 12-volt dc power and be able to be dimmed. This driver works well with all 12V dc LED tape lighting. For other types of LED lighting contact the manufacturer to confirm you lighting is dimmable and it operates on 12-volt dc power.