Sold and shipped by: First Expand Intelligent First Expand Intelligent
83 Ratings (42% Positive)
  • $57.50

Meet Your Sellers

Are you an E-Blast Insider?

Raspberry Pi 3 Model B+ 2.8 inch Touchscreen 320*240 LCD TFT SPI Display for All Version Raspberry Pi with Touch Pen

In stock.
Ships from Hong Kong.
Most customers receive within 3-16 days.
  • Package list :
  • 1 x 2.8 inch Touchscreen
  • 1 x Touch Pen
  • ( not include Raspberry Pi )
2.8 inch:
Feature: 320×240 resolution Resistive touch control Supports any revision of Raspberry Pi (directly-pluggable) Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions Drivers provided (works with your own Raspbian/Ubuntu directly) Size perfectly fits the Raspberry Pi High quality immersion gold surface plating Supports Raspbian system, Ubuntu system, Kali Linux system LCD Type TFT LCD Interface SPI Touch Screen Type Resistive Touch Screen Controller XPT2046 Colors 65536 Backlight LED Resolution 320*240 (Pixel) Aspect Ratio 8:5 Active Area 43.2 x 57.6 (mm) Dimensions 51.53 x 76.68 (mm) Weight 25 (g)
Interface: PIN NO. SYMBOL DESCRIPTION 1, 17 3.3V Power positive ( 3.3V power input) 2, 4 5V Power positive (5V power input) 3, 5, 7, 8, 10, 22 NC NC 6, 9, 14, 20, 25 GND Ground 11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching 12 KEY1 Key 13 RST Reset 15 LCD_RS LCD instruction control, Instruction/Data Register selection 16 KEY2 KEY 18 KEY3 KEY 19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel 21 TP_SO SPI data output of Touch Panel 23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel 24 LCD_CS LCD chip selection, low active 26 TP_CS Touch Panel chip selection, low active How to use it with
Raspbian System: Step
1: Install Raspbian official image file 1) Download the latest image from the official download 2) Install the system according to the official tutorial steps.
Step 2: Install the driver for the LCD 1) Connect the 2.8 inch RPi Display with the Raspberry Pi and plug it in 2) Log into the command line interface for
Raspberry Pi(Initial user name: pi, Password: raspberry), Get the latest drive from GitHub (the raspberry pie needs to connect to the Internet), Execute
the following commands: sudo rm -rf LCD-show git clone
Note: If you want use for 2.4 inch screen, need to use LCD24-show After execution, the system will be restarted. If the display and touch are normal, the installation is successful.
Package list: 1 x 2.8 inch Touchscreen 1 x Touch Pen ( not include Raspberry Pi )

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info