- Free 30-day Returns
Meet Your Seller
NEMIX RAM 8GB (1 x 8GB) DDR4 2400MHz PC4-19200 1Rx8 1.2V 288-PIN ECC UDIMM Unbuffered Memory Kit
- 8GB (1 x 8GB) DDR4 2400MHz PC4-19200 1Rx8 1.2V 288-PIN ECC UDIMM (Unbuffered DIMM) Memory Upgrade
- NEMIX RAM ECC UDIMM for machines requiring DDR4 2400MHz PC4-19200.
- NEMIX RAM offers Lifetime Replacement Warranty
Any questions? Ask CelesteSM will help you find out quickly.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by NEMIX RAM Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
NEMIX RAM’s 8GB DDR4-2400 ECC UDIMM is a single unbuffered memory module for compatible servers or workstations that require 288-pin, 1.2V PC4-19200 ECC memory.
Recommended For
- Owners of a Supermicro SYS-5019S-ML replacing a failed module or adding 8GB of ECC memory; this is a 288-pin DDR4-2400 ECC UDIMM matched to that server.
- Home-lab users setting up a modest pfSense or OPNsense firewall on a SYS-5019S-ML who need an ECC UDIMM; a community owner reports using that server with 8GB ECC memory for firewall and 10G routing.
- Small-business operators maintaining a SYS-5019S-ML as an entry-level server or appliance who want to replace or incrementally expand its ECC memory.
- Homelab builders running a small number of services on a SYS-5019S-ML who need a single compatible 8GB module, rather than a high-capacity memory kit.
Real-World Use Scenarios
- When repairing or upgrading a compatible Supermicro SYS-5019S-ML or X11SSH-F system, this 8GB module can add or replace memory; confirm the system supports ECC unbuffered DDR4 UDIMMs before installing it.
- For a small file server or NAS built on a compatible server platform, the ECC memory supports single-bit error correction, adding a layer of protection against memory errors during routine storage duties; it does not replace backups or protect against every cause of data loss.
- In an entry-level server or network appliance, it can serve as a compatible memory replacement or addition for basic services; a single 8GB module is better suited to modest workloads than running several memory-intensive virtual machines.
- For a home lab or small server running a lightweight service such as file sharing, a compatible system can use this module as a straightforward ECC memory upgrade; workloads that run multiple virtual machines may need more total RAM.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Adding 8GB of ECC unbuffered DDR4 memory to systems that require 2400MHz ECC UDIMM |
| Memory Capacity And Configuration | 8GB single-module configuration (1 × 8GB) |
| Memory Type And Error Correction | DDR4 ECC UDIMM, unbuffered |
| Memory Speed And Timing | 2400MHz (PC4-19200), CAS latency 17 |
| Voltage And Rank | 1.2V, 1Rx8 |
| Memory Chip Suppliers | Major OEM chips from Samsung, Micron, or Hynix |
| Brand And Model Identifiers | NEMIX RAM; ME19200-818K1-SM-SYS-5019S-ML |
Reference Q&A
Q: Should I choose this 8GB module or a NEMIX 16GB DDR4-2400 ECC UDIMM?
A: Choose this 8GB module when an 8GB capacity increase fits your memory plan. Choose a single 16GB NEMIX DDR4-2400 ECC UDIMM when you want twice the capacity from one module. Both options are DDR4-2400 ECC unbuffered memory; confirm the target system supports the module size and configuration.
Q: Is this 8GB stick or a NEMIX 16GB (2×8GB) kit a better fit?
A: Choose this single 8GB stick when you need one 8GB ECC UDIMM. Choose the NEMIX 16GB (2×8GB) kit when you want 16GB total across two modules. Check your system’s supported memory capacity and slot configuration before choosing.
Q: Should I get this ECC module or NEMIX’s 8GB DDR4-2400 non-ECC UDIMM?
A: Choose this ECC UDIMM when your system configuration calls for ECC memory. Choose the NEMIX non-ECC UDIMM when the system is configured for non-ECC memory. Both are 8GB, DDR4-2400, 1.2V unbuffered UDIMMs; verify the memory type supported by your system.
Q: Should I choose this 8GB ECC UDIMM or a 4GB NEMIX DDR4-2400 ECC UDIMM?
A: Choose this 8GB module when you want twice the memory capacity per module. A 4GB module is the smaller-capacity option. Both are listed in NEMIX’s DDR4-2400 ECC UDIMM range; check your system’s supported module sizes.
Q: How can I tell if this RAM is compatible with my server or workstation?
A: Check the system’s documentation for support for 288-pin DDR4 ECC UDIMM memory, 8GB modules, and 2400MHz speed. DDR4 support alone is not enough: the system must support unbuffered ECC memory, and its CPU and motherboard may also affect compatibility.
Q: Will this memory provide ECC error correction in my system?
A: The module is ECC memory, but error correction works only if the system’s processor and motherboard support ECC with unbuffered UDIMMs. Confirm ECC support in the system documentation before buying.
Q: Can I install this alongside the RAM already in my system?
A: Possibly, if the system supports the module and its memory configuration allows mixed modules. Check the system manual for supported capacity, speed, rank, and mixing rules; matching the existing memory’s specifications is the safer choice. This product is one 8GB module.
Q: How can I tell whether this ECC UDIMM will work in my server?
A: Check the server or motherboard’s memory requirements before buying. This module is an 8GB DDR4-2400 ECC UDIMM, unbuffered and 1Rx8; it is not a registered DIMM. A Reddit compatibility discussion about a different NEMIX ECC UDIMM shows why confirming the required memory type matters. That discussion does not verify compatibility with this specific part.
Q: Can I add this stick to RAM that is already installed?
A: Possibly, but check the existing memory and system requirements first. Match the supported ECC type and form factor, and consider capacity, rank, and speed; mixed modules may not run at the same speed or work reliably together. Reddit discussions about other NEMIX ECC UDIMMs include questions about mixing memory, but do not establish compatibility for this exact module.
Q: Will it run at 2400 MHz in my system?
A: The module is rated for DDR4-2400, but its actual operating speed depends on the system’s memory controller and configuration. A Reddit discussion about different NEMIX ECC UDIMMs reports lower-than-rated operation on one build, so confirm your platform’s supported speed rather than assuming it will run at 2400 MHz.
Q: Are NEMIX ECC memory modules reliable?
A: Reddit reports are mixed: some users describe successful use, while others report failures or compatibility problems with different NEMIX modules. These anecdotes do not establish the reliability of this specific 8GB DDR4-2400 part. The product information lists a lifetime replacement warranty; review its terms before relying on it.














