GIGABYTE GZ-KF03B Black SGCC ATX Mid Tower Computer Case

Pros: Lots of room for lots of stuff! nice looking case for the price.

Cons: I ordered one, the face plate was broken on delivery and the clips that hold it in place break as soon as you touch them. RMA'd it, only to have the same issues with the second one. At least the second one's face plate was not broken, but the clips still won't hold it in place, I will fix it myself!!! If it had better face mounting clips this would be a steal. One egg knocked off per broken case.

Overall Review: Newegg was very easy to work with and very helpful. They made the RMA process a breeze. It's not thier fault this case is cheaply designed.

Pros: Cheap. small size.

Cons: Motherboard standoffs were not threaded correctly. The threads didn't match the MB screws included nor the screws from my existing computer. I had to pull the standoffs from my old 'puter in order to get it to work. Dents in the side panel and on the top panel. No damage to the shipping box, so the dents came from the factory - thanks, gigabyte!

Overall Review: do the dents matter? not really for me - one dent is on the backside, and the dent on top isn't really noticeable under my desk. the bad standoffs would have been a real stumbling block for anyone doing a first build, etc. Front 80mm fan requires a Low-profile fan.

Pros: Cheap Case

Cons: Cheap Case

Overall Review: For $15 you can't complain.. It is flimsy.. It is "tight" with an ATX Board.. Large Video cards can be a pain, or might not fit at all.. But hey man.. Its $15 freakin bucks... what did you expect? Using 1 for a Living Room Entertainment Center System (HDMI to Plasma TV) and one for a spare "Internet Browsing" system. Id buy another one if I built a system out of spare parts to sell or something... Did I mention it was only $15? :)

Pros: So so case. Can't argue with the price. Too small for extensive builds.

Cons: Metal is cheap. Only comes with one PCI external cover. The other ones have to be popped out for good with a screwdriver which usually ends up bending some of the metal. Also had a hard time getting my I/O plate secure and lined up properly. There is no really good way to mount the power supply, it's just held on to the back by a couple screws and sits on some very small metal mounts on only one side of the case.

Overall Review: For $20, you will be pleased. I'd recommend for MicroATX builds only. The case is 13-14" deep. Had a hard time fitting everything in with a full size mobo. Only about 6-7" clearance for a VGA. Have an NZXT Gamma($36) on the way and I'm using this case for a MicroATX Llano build for a friend.

Pros: I have purchased 2 of these so far. 1 of them had faulty front usb ports. Gigabyte support was easy to contact, quick to help, and replaced the bad part. A+ for the Gigabyte support. These cases look very nice on the outside. Everything installs fine, I didn't have to change the case in any way. All the normal hardware is included. The metal is thin, and this is a pro to me because it makes the case light and easy to carry or move around. I had no problems with bending or flexing or denting, however it should be obvious if you put a lot of weight or force on any kind of thin metal it will happen. I have had much stronger cases with thicker metal become dented and bent, you simply have to take care of your case. Both of the recent times I was shopping for cases, this had the lowest combined price + shipping. I hope that continues, I will definitely buy this case again.

Cons: 1 out of the 2 I bought had a bad front panel usb board, however Gigabyte support did an A+ job of replacing the bad part quickly. Not much of a con, this will not stop me from buying again, the excellent support makes me want to buy more!

Overall Review: Excellent value, performance, and support. I tried other cheap cases before this one, I wish I would have been buying this one all along!

Pros: Got it for $20 on sale, add $10 shipping, adding up to $30 all told. It's nice looking on the outside, with mounting space for up to 4 fans.

Cons: For a $30 mid-tower case, nothing to complain about.

Overall Review: It is what it is. It's cheap and flimsy, unpainted on the inside, with the potential to have sharp edges (didn't find any in mine), but it does the job. Anyone who expects anything more from a $30 case is living in a dream world. Comes with 6 brass and 3 plastic mobo standoffs, a few other case & drive screws, and the pictured case speaker. Depending where you want to put it, you may wish to pick up round rubber feet for the bottom, about 1/2" or smaller diameter.

Pros: Good price for this case. The sides open with ease. Comes with screws, mounting spacers, and all the basic stuff you need with a case. Doesn't come with any fans, the Case is thin metal!! Its a mid tower and just fits my ASUS P8H67-M PRO/CSM LGA 1155 Micro ATX motherboard is Very tight fit front to back. There is brackets in the front for a 100-90mm fan, but the space given needs a thin fan. I have a 90mm in the back, and a 90mm in the side panel, in addition to the CPU fans. Also, the front I/O panel works, however, USB ports are upside down. So, When you plug a flash drive the Orientation is face down. I could just remove the panel and flip it around. Audio connectors on front panel work I had to force my mic in a little.

Cons: Doesn't come with any fans, the Case is thin metal. Very tight fit front to back. There is brackets in the front for a 100-90mm fan, but the space given needs a thin fan. The front I/O panel works, however, USB ports are upside down.

Overall Review: Nice looking case good price, It holds everything inside nice and snug. The buttons and front connectors all work I would purchase again for a low cost build. Case lost one egg because of front fan design and tight fit.

Pros: this main board will match to all the the things this case has inside it BIOSTAR COMBO6S2 AMD Sempron 130 AM2+/AM2 NVIDIA MCP68S Micro ATX Motherboard/CPU Combo Model #:COMBO6S2 Item #:N82E16813138322 also will fit in a eco star power supply

Cons: none really only that if you move around a lot or have kids close and they fall on it, its possible they could crush the metal parts like a can. but hey can't complain it is a case and im not looking for a case that's gonna be heavier then my trash bag. I rather it be light and less on the back when i need to move it. oh and i don't have kids or pets so my case will be ok. and and no drunks who cant stand up.