Ports Spec: USB C HUB 8 IN 1
HDMI: Supports 4K*2K (3840x2160) 30Hz
USB-C data transfer port: Data transfer speed up to 480Mbps
USB 3.0: Data transfer speed up to 5Gbps
USB2.0: Can be connected to mouse, keyboard, etc.
PD charging port: supports up to 87W fast charging
RJ45 Ethernet: enjoy fast connection speeds up to 100Mbps
SD card slot: speed up to 104 MB / s
TF card slot: speed up to 104 MB / s
Specifications: Compatibility:PCIe Gen 4 x16
Supported Graphic Cards:Any length, up to 3 slots wide
Required Slots:7 available PCIe slots for mounting
Dimension: 186.8mm x 144.7mm x 150.4mm
Package Content: 1 x Vertical GPU Mounting Kit
1 x Steel GPU Bracket & 175 mm PCIe Gen 4 Riser Cable
1 x Installation Accessories
Block Compatibility: Compatible with a wide range of M.2 SSDs, including NVMe and SATA interfaces. Designed specifically for 2280-size SSDs, and the 3mm adjustable height allows it to support one-sided and double-sided SSDs. Suitable for most mainstream SSD models, such as SAMSUNG PCIE 4.0 980Pro, 970Pro, SN850, TiPro7000, SPATIUM M480 PLAY, MP600,
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Specifications: CORSAIR TM30 thermal paste helps you push your PC to its limit, with a low-viscosity premium zinc oxide thermal material that’s easy to apply. TM30’s ultra-low thermal impedance ensures high-efficiency heat transfer between your hardware and cooler, lowering temperatures and allowing for higher clock speeds.
Net Weight: 3g
Thermal Conductivity: 3.8 W/mK
Thermal Impedance: 0.01°C -in2/W
Viscosity: 2300K cPs
Specific Gravity: 2.5g/cm3
Specifications: Screw Adjustment Design
Adjustable height to match various computer cases and motherboards. The supportable height range of our gpu riser is 70-120mm.
Magnetic Non-Slip Base
The magnets in the base of the gpu stand. There are non-slip washers on both sides of the gpu holder, which will not damage the chassis.
All-aluminum Metal Material
Provides strong and long-lasting support. GPU brace support is made of all-aluminum metal, can be used as a long-term replacement.
Versatile Compatibility
Our gpu support bracket accommodating both traditional and long power supply bays, to cater to every user's needs.