Digital Radiator Fans Controller Swith 12V and 24V, Adjustable Temperature Range Digital Electric Thermatic Fan Switch Kit (Part #0444)

Stable PerformanceDigital radiator fan switch kit is made of standard material, wear resistant and durable. Professional manufacturing, high qualit, and long service life. size 3.75" x 2.6" x 2.2". Suitable for single and dual fan applications.
Professional: come from a manufacturer with more than 20 years of professional experience.
Our service tenet is: "Professional, standardized, team, efficient"
Product Description

AIR TEMPRETURE APPLICATION

The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).

WATER / COOLANT APPLICATION

The 0444 sensor can also be placed directly into the coolant system and no need to cut hoses. You will need to use a Temperature Sensor Adaptor Kit (Part 0409) to assist with this type of fitment. It is recommended to install the sensor in the return hose from the radiator.

SPECIFICATION

Relay setup: Dual relay

Sensor Wire length: 142cm in total (Wire from switch 112cm plus sensor connector 30cm)

Speed: Single speed, 10 second delay to start up the second fan

Applications: Suitable for single and dual fan applications

Screen Display: LED digital temp display, actual temp + set temp

Temp Display: Centigrade or Fahrenheit

Temp settings: 40°c to 110°c (104°F to 230°F)

Temp setting: Push Button

Circuit type: Pre-programmed micro controller

Dimensions: 95x65x56 mm

*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we would recommend part number 8002 which can manage both the EWP and your Thermatic Fans.