Specifications: Item: M. 2 SSD to USB 3.1 Type A Adapter Board. Material: PCB Board. Protocol: B-Key and M-Key. Input: M.2 SSD Slot, both B-Key and M-Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
Specifications: Connects a USB-C or Thunderbolt 3 PC, laptop or tablet to a wired Ethernet network
Provides instant access to Gigabit speeds without an internal Ethernet card
Simplified connections with a reversible Type-C connector that plugs into your device’s port in any direction
Easy to install with plug-and-play operation - no software or drivers required
Ultra-compact design for easy transport
Specifications: System Requirements:
1 or 2 computers with available USB ports
Switch is compatible with all USB-enabled operating systems
Optional software is compatible with Windows (XP and later) and Mac (OS X 10.3 and later)
Approvals: FCC and CE
Specifications: Connector on First End:1 x Type A Male USB 3.0 USB
Connector on Second End:1 x 40-pin IDC Female IDE
1 x 7-pin Male Serial ATA 3.0 SATA
Package Contents: USB 3.0 to SATA / IDE Combo Adapter
USB 3.0 Cable - 2.5 ft.
4-Pin Molex Power Cable
External Power Supply (Input: 100-240V, 50/60Hz, 0.8A Output: 12V, 2A)
Owner's Manual
Backup Software CD
Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes