16 (Replaceable) surge protectors with Panel mount
Includes: 1x Rack Rail; 16x Surge Protectors
Compatible with 19" Inch Server RackMount Cabinet 1U
Rack Mount Rail 1U with 16x Ethernet Surge Protectors
protects 16 lines, and it's ready to mount into rackmount slot on 19" (inch) (1U) data protection rack server cabinet panel.
Each
Ethernet Surge Protector
is a surge protection device (SPD) that is inserted inline on an RJ45 CAT6/CAT5/CAT5e cable to prevent damage of electronic networking equipment. Each single protector on the rail can be replaced with single compatible Tupavco item
TP309 (ASIN: B078NKGPJC).
Powerful surges that the device protects against include direct lightning strikes, voltage spikes, or PoE overvoltages. Despite the primary protection (a direct strike to a line), the thunder arrestor also offers secondary protection, which will arrest EMF induced surges (nearby lightning ethernet).
Gas discharge tubes (GDTs)
are developed to overcome some of the disadvantages of diode-based protectors like energy handling capability and is suitable for almost all surge, whether high or low frequency, it can be intercepted by a gas discharge tube surge arrester so it provides a rigorous spark discharge control performance.
Ethernet Surge Suppressor TP316 use a Gas Discharge Tube (GDT) on all 4 pairs (8 wires). Gas discharge tubes dissipate the voltage transient through a contained plasma gas which harnesses excess voltage in the incoming power and releases it safely. It ensures the safety of a wide array of valuable components such as switch, router, modem, bridge, repeater, or any part of internet service network.
16 Lines/Ports RJ45 Lightning Protection for Gigabit 10/100/1000 (GbE) and High PoE+ Networks
The gigabit surge protector date rate of
Gigabit 10/100/1000 (GbE)
transfer supports an ultra-fast maximum data rate of 1 Gigabit per second (Gbps - 1000 Mbps) and does not affect the speed performance in the local area network.
POE Surge Protector
allows a single RJ-45 cable to provide both data connection and electric power to device such as wireless access point, IP and security camera, VoIP phone, computer and others. Surge Arrestor TP303 is designed to protect PSE (power-supply equipment) connected to a network from transient overvoltages. The lightning protector PoE supports both
Mode
A (Pins 1, 2+ 3, 6-) and B
(7, 8+ 4, 5-)
of the
802.3 af
standard.
802.3 af (PoE)
can deliver up to 15.4 watts per port with 12.95W at the powered device, while
802.3 at (PoE+)
can deliver up to 30 watts with 25.5 watts available to devices. PoE Plus is also known as
High PoE